715971
23
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
Stand 24.2.2020
23 von 68
DE
EN
FR
NL
IT
ES
PL
OPERATION
1. Comply with all safety instructions and safety regulations.
2. Ensure that you have selected a safe location.
3. Plug the mains plug of the appliance into an electrical outlet (220–240 V ~
50/60 Hz).
4. The operating elements are under the flap on the top side of the appliance.
5. Select the desired function via the appropriate switch:
- Ventilation for cool air
- Level „I“ for minimal heat (approx. 1,000 watt)
- Level „II“ for more heat (approx. 2,000 watt)
6. Switch the appliance to „On“ on the timer, the appliance starts running.
7. To heat a room, turn the thermostat switch clockwise to the maximum
possible setting. As soon as the room has reached the desired temperature,
slowly turn the thermostat switch counter-clockwise. The appliance heats
until the desired temperature is reached, then the appliance switches off.
The appliance will switch on again as soon as the room temperature drops
below the set temperature.
8. If you want to use the appliance without automatic room temperature
monitoring, turn the thermostat switch to the maximum setting.
9. The indicator light signals operation of the appliance and goes out when the
thermostat switch is switched on.
10. Note concerning the ventilation function: If the appliance was previously
running in heating mode, the out-flowing air will still be warm initially.
Depending on the previous heating capacity it can take some time until the
appliance provides cool air. When you set the fan function, you must place
the thermostat switch on the highest position.
Timer/Zeitvorwahl function
11. Via the Timer switch, select the desired run time between 1 and 120 minu-
tes by setting the Timer switch to the desired operating time. However, first
turn the switch completely up to the maximum possible time once, and only
thereafter turn it back to the desired minutes. After this time elapses the
appliance will switch off. If you want to let the appliance run longer, you
must set the time again. Naturally, you can readjust the timer settings at
any time the appliance is in operation.
12. To switch off the appliance, place all switches on the „0“ position and
unplug the mains plug.
Be aware that the appliance can become very hot - fire hazard! Particularly
ensure that children are kept away from the appliance.
Copyright UNOLD AG | www.unold.de
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Unold 86450 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info