10
I UWATEC
®
Aladin
®
dive computers
Setting
• TEC Depth alarm
• TEC Dive time alarm
• TEC Safety stop duration
• TEC Maximum partial pressure of
oxygen (ppO
2 max
)
• Time limit to reset the O
2
% mix to air
• Unit system
•
TEC
Water type
•
TEC
Backlight illumination duration
• Audible attention signals
• Water contacts
• Reset desaturation
• TEC Gauge mode
• Alarm clock
• UTC zone
• Time of day
• 24 or AM/PM setting
• Date
• LCD contrast
• Sound
II System and operation
2.2 Water contacts
On submerging in water the water contacts switch on Aladin
®
automatically
.
If you have chosen the option
"
Water contacts off
"
(
"
set 1
"
, ->41), Aladin
®
will turn on with a delay of up to 1 minute into the dive. This will affect fun-
ctioning of the computer.
Make sure that the computer is on before starting the dive.
2.3 SmartTRAK
With SmartTRAK you can configure Aladin
®
, transfer dive data to a personal computer and graphically
dis-
play the data.
If Aladin
®
detects an infrared device within range appears.
The following settings may be changed with SmartTRAK or via
"
set 1
"
or
"
set 2
"
directly on
Aladin
®
:
The following data may be recalled with SmartTRAK:
• Number of past dives
• Total length of dives
• Deepest dive
• Longest dive
• Atmospheric pressure
• Dive profile
• Logbook
• Temperature curve
• Alarms and attention messages
• TEC Bookmarks
• TEC Average depth (only in gauge mode)
Range
5 - 100 m (20 - 330 feet) on/off
5-195 min., on/off
1-5 min.
1.2-1.6 bar
no reset / 1 - 48 hrs.
metric/imperial
on (salt water)/off (fresh water)
2-12 sec.
on / off (SmartTRAK: selective)
on / off
on / off
on / off
0 - 23 h 59 min., on/off
±13 hrs., increments: 15 min.
hours:minutes
24 (off) / AM/PM (on)
1 (low) -12 (high)
on / off
Default /
Setting in
Aladin
®
PRIME
40m (130ft),off
60 min., off
3 minutes
1.4 bar
no reset
on (salt water)
6 sec.
on
on
no reset
off
12:00, off
0:00
GMT
1 (low)
on
Page
->39
->39
->40
->40
->40
->40
->40
->40
->41
->41
->41
->28
->42
->42
->42
->43
->43
->43
->44
