Bedienungsanleitung UWATEC Galileo Terra (Seite 45 von 62) (Englisch)

550357

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

3. Diving with Galileo

English

- max depth

- oxygen concentration

- CNS O

- ppO

- nitrogen loading (via right bar graph)

- oxygen toxicity (via left bar graph)

The middle button has no label if you are

diving with MB L0. Pressing it produces

no result. If on the other hand you are

diving with an MB level between L1 and

L5, the middle button will be labelled

MORE and pressing it will show the no-

stop or decompression information at L0

for 5 seconds in stead of the information

relative to the active MB level.

The stopwatch is reset and restarted by

pressing the left button (BOOK).

3.4 Special functions

common to CLASSIC,

LIGHT and FULL

conﬁ gurations

3.4.1 Accessing and using the digital

compass

In all lay-outs, a press and hold of the right

button (marked LIGHT) brings up the digital

compass display on your computer screen.

The display also shows the depth, the dive

time and the no-stop or decompression

information alternating in 4-second intervals

with the stopwatch. A press and hold of

the right button from the compass display

returns to the computer display. This also

happens after the set auto-off time deﬁ ned

in section 2.4.2.



NOTE:

If you are in compass mode when

Galileo is about to end the no-stop

phase, the screen will revert to the

regular computer display regardless

of the set auto-off time. Press and

hold the right button again if you wish

to return to the compass display.

In this lay-out, the button functions change

slightly. The middle button is now marked

SET. Pressing this button will set the

bearing. Compass bearing represents

the direction the front of the computer is

pointed at. It is expressed in degrees, from

0 to 359. 0 degrees is North, 90 degrees is

East, 180 degrees is South, 270 degrees is

West and any other reading is interpolated

in between.

The message SET BEARING

SUCCESSFUL will show on the display

and a dot will appear in the position of the

set bearing. Setting a bearing allows you to

navigate towards a reference direction. A

press and hold of the middle button will

erase the set bearing. Note that the set

bearing stays in memory until you either

set a new one or erase it. All set bearings

are kept in the proﬁ le memory and can be

viewed with SmartTRAK after downloading

the dive to a PC.

If you have set a reference bearing, arrows

will appear to the left or to the right of the

numeric bearing indication, to show you in

which direction you should turn in order to

match the set bearing. As an additional aid

in navigation, Galileo automatically marks

the positions at 90 and 120 degrees to

the left and to the right of the set bearing,

in addition to the position at 180 degrees

(as an aid for square course, triangular

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

UWATEC Galileo Terra Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von UWATEC Galileo Terra

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info