Bedienungsanleitung Vaillant ecoVIT exclusiv VKK 366-4 (Seite 7 von 16) (Englisch)

748582

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Operation 4

0020258609_00 ecoVIT exclusiv Operating instructions 7

3.4 Frost protection function

The product is equipped with a frost protection function.

If the heating flow temperature falls below 5 °C when the

main switch is on, the product starts up and heats the cir-

culating water to approx. 30 °C.

Caution.

Risk of material damage due to frost.

The frost protection function cannot guaran-

tee flow through the entire heating installa-

tion, which means that parts of the heating

installation may freeze and therefore become

damaged.

▶ During a period of frost, ensure that the

heating installation remains in operation

and that all rooms are sufficiently heated,

even when you are away.

▶ Consult a competent person about this.

3.5 Type designation and serial number

The type designation and the serial number are located on a

sticker below the control panel behind the front flap.

The data plate can only be seen by the competent person.

▶ Open the front flap. (→ Page 5)

▶ Read off the type designation and the serial number from

the sticker.

3.6 CE label

The CE label shows that the products comply with the basic

requirements of the applicable directives as stated on the

identification plate.

The declaration of conformity can be viewed at the manufac-

turer's site.

4 Operation

4.1 Adjustment and display levels

The product has two adjustment and display levels.

The end user level contains information and setting options

that you require as the end user.

The installer level is reserved for the competent person. It is

protected by a code. Only competent persons may change

any settings in the installer level.

4.2 Starting up the product

4.2.1 Opening the isolator devices

1. Ask the competent person who installed the product to

explain to you where these isolator devices are located

and how to handle them.

2. Open the gas stopcock fully.

3. Check that the heating installation flow and return

service valves are open, if such service valves are

installed.

4. If a domestic hot water cylinder is connected, open the

cold-water isolation valve. To check, you can turn on a

hot water tap and see whether water is escaping there.

4.2.2 Switching on the product

1 Main switch 2 Display

1. Use the main switch (1) to switch on the product.

◁ 1: "ON"

◁ When the main switch is in position 1, the product is

switched on and the standard display for the Digital

Information and Analysis System is shown in the

display. The function menu is immediately shown

in the display once the product has been switched

on. The function menu enables competent persons

to control how the individual actuators work. The

product returns to normal operating mode after a

waiting period of approximately five seconds or if the

− button is pressed.

2. Set up your product according to your needs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vaillant ecoVIT exclusiv VKK 366-4 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vaillant ecoVIT exclusiv VKK 366-4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info