748557
12
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
5 Operation
12 Operating instructions geoTHERM 0020250185_00
The display shows a highlighted selection
level, a setting level or a highlighted value
with white font on a black background. A
flashing, highlighted value means that you
can change the value.
You always have the option to cancel the
change to a setting or the reading of a
value by pressing the left-hand selection
button.
Note
If you do not press any buttons
for more than 15 minutes, the
display returns to the basic display.
Changes that are not confirmed will
not be applied.
5.2 Operation in the basic display
50
kWh/d
In the normal operating status, the ba-
sic display is shown. The basic display
shows the current condition of the unit. If
the display has been dimmed, the light is
switched on by the first press of the button.
In this case, to trigger the button function,
you must press the button again.
You can call the yield indicator directly
from the basic display:
Pressing the left-hand selection button
once: Heating mode yield indicator
You can access all other functions via the
menu.
You can switch back to the basic display
by:
Pressing the left-hand selection button
and exiting the selection levels
Not pressing any button for longer than
15 minutes.
Changes that are not confirmed will not be
applied.
If there is a fault message, the basic
display switches to a plain text display of
the fault message.
From the basic display, you can directly
change and read the most important set-
tings and information by pressing the se-
lection buttons.
5.3 Operating levels
The product has two operating levels.
The operating level for the operator shows
the most important information and offers
set-up options which do not require any
special prior knowledge.
The operating level for the competent per-
son must only be operated by persons with
expertise and is therefore protected by a
code. In this level, the competent person
can set system-specific parameters.
5.4 Design of the menu
1 Scrollbar (if more
than three list
entries are avail-
able)
2 Current functions
of the right and
left-hand selec-
tion buttons (soft
key functions)
3 Selection level
list entries
4 Current function
or selection level
In addition to the direct operation via the
selection buttons from the basic display,
the digital information and analysis system
has a menu that, in turn, has several se-
lection levels (sub-levels).
Using the selection levels, you can nav-
igate to the display and setting levels in
which you can read or change settings.
The selection levels have four display
fields.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vaillant geoTHERM VWS 36-4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Vaillant geoTHERM VWS 36-4

Vaillant geoTHERM VWS 36-4 Bedienungsanleitung - Deutsch - 24 seiten

Vaillant geoTHERM VWS 36-4 Bedienungsanleitung - Holländisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info