Bedienungsanleitung Vaillant VRC 430 (Seite 16 von 40) (Englisch)

665294

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Operating Manual VRC 430 0020042468_0216

The time for the end of the time window 1 should be set

accordingly.

The desired comfort temperature for time window 1 is

set as follows:

⇒ Rotate the right-hand dial until the cursor



is in

front of the field for the entering comfort tempera-

ture for time window 1.

⇒ Press the right-hand dial.

The input field is highlighted.

⇒ Turn the right-hand dial to select the desired com-

fort temperature (the temperature jumps by 0.5 °C

for every click).

⇒ When the comfort temperature is displayed, confirm

by pressing the right-hand dial.

Note!

The controller helps the operator to programme

the time windows: You can only enter sequen-

tial entries. The timer for a subsequent window

cannot be earlier than a previous one.

A time window may only be between 0:00 and

24:00.

An existing time window can be deleted as fol-

lows: Set the start time and the end of a win-

dow to the same time.

Note!

Set the timer for warm water generation and

circulation pump in the same way as for the ex-

ample, heating circuit 1. There is no need to

enter a comfort temperature for hot water gen-

eration and circulation pump.

4.7.2 Programming holiday periods

If you will not be home for an extended period, you can

set a lower target room temperature for that period.

This will save heating energy. The controller ensures

that the heater heats up the living rooms to the set

temperature only.

You can, for example, specify a target room tempera-

ture of 15 °C if you are on holiday from the 10th to the

24th of February. The rooms will only be heated to

15 °C during this period.

You can also select the frost protection function instead

of the target room temperature.

Proceed as follows to programme a holiday period:

⇒ Turn the left-hand dial until screen 7 "holiday pro-

gramming for entire system" is displayed.

> Set starting day



Holiday programming

Period:

for cpl. system

Room temp.:

10 . 02 . 06 - . .

Frost prot.

Fig. 4.14 Screen 7 (example)

⇒ Turn the right-hand dial until the cursor is



at the

beginning of the start date.

The comment field contains the text "Set starting day".

⇒ Press the right-hand dial.

The input field is highlighted.

⇒ Turn the right-hand dial until the desired starting

day is displayed.

⇒ Press the right-hand dial.

The start date is set. The display jumps highlighted to

normal.

⇒ Set the month and year in which the start date oc-

curs in the same way.

The comment field contains the text "Set starting

month" or "Set starting year".

⇒ Set the end date for the holiday period in the same

way.

Enter the target room temperature as follows:

⇒ Turn the right-hand dial until the cursor



is in front

of the input field for the target room temperature.

4 Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vaillant VRC 430 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info