469501
10
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
Operating manual – auroMATIC 560 0020008427_0110
Operating modes:
Reheating function with timer program
Reheating function in constant standby
mode
No reheating
No actuation of solar pump(s),
no reheating
Reheating function in automatic mode – the
corresponding symbol for the time window
status is displayed next to the clock symbol.
Time window active
Reheating function in automatic mode
Time window not active
Display Required steps
Turn the dial, after 3 seconds the cursor
marks the temperature display, which
will be flashing.
Turn the dial to adjust the target value
for the cylinder temperature.
Click the dial - The cursor will mark the
operating modes. The selected operating
mode flashes.
Select an operating mode by turning the
dial.
Click the dial - The cursor will mark the
day of the week. The selected day of the
week flashes.
Turn the dial to select the current day of
the week.
Click the dial - The cursor will mark the
hours and/or the minutes.
Turn the dial to adjust the current time.
Table 5.2. Settings in the main operating level
5.5.3 Setting the reheating function timer program
You can create a timer program with up to three time
windows for reheating the solar cylinder.
The controller is equipped with a default program which
can be customised to meet your individual needs.
Time window Weekday/
Block of days
Start time End time
H 1 M0 - S0 5:30 22:00
H 2 — — —
H 3———
Table 5.3 Default reheating program
There are four steps to setting the times you want:
1. Select the time window,
2. Select a weekday or block of days,
3. Specify the start time,
4. Specify the end time.
You can specify up to three time windows, as long as
none of the time windows overlap another.
For clarification, the individual steps are shown in the
following table:
Display Required steps
Press the programming key P
Turn the dial until you see the tap sym-
bol.
Click the dial - The cursor marks the
changeable value (H1), which also flash-
es.
Select the time window by turning the
dial.
Settings: H 1, H 2, H 3
Click the dial - The cursor marks the
block of days display, which also flashes.
Select a block of days or a single day of
the week by turning the dial.
Settings: (MO-SU); (MO - FR); (SA-SU);
(MO); (TU); (WE); (TH); (FR); (SA); (SU)
Click the dial – The cursor marks the
start time and the hour display flashes.
Select the start time by turning the dial.
Click the dial again to set the minutes.
Click the dial – The cursor marks the end
time and the hour display flashes.
Select an end time by turning the dial.
To adjust the minutes, click the dial
again.
Table 5.4 Setting time windows
5 Operation
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vaillant VRS 560 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Vaillant VRS 560

Vaillant VRS 560 Bedienungsanleitung und Installationsanweisung - Holländisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info