Bedienungsanleitung Valco Baby Rebel Q (Seite 5 von 8) (Englisch)

769443

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

FOLDING YOUR STROLLER

FIGURE M - FOLDING

36. Lower the seat to the full recline position. Note: This is not

necessary for folding but will ensure that your Rebel Q stroller is at its

most compact when folded.

37. Fold the hood back against the frame.

38. Squeeze the center locking button on the handle.

39. While keeping the centre locking button depressed, press the

frame lock button rmly and push the handle inward, with a rm

downward action, past the frame lock until it engages the lock

spring. This will unlock the frame.

40. Continue to ease the chassis downward until it is fully collapsed.

FIGURE N- FRAME LOCK

41. Locate the locking clasp on the side of the stroller frame.

42. With your stroller in the closed position, swivel the clasp into

position and secure the catch over the frame rivet.

43. Your stroller is now ready for storage or transport.

HARNESS

FIGURE O - USING YOUR HARNESS

YOUR STROLLER IS FITTED WITH OUR UNIQUE MULTI POINT SAFETY

HARNESS SYSTEM. ALWAYS USE THE HARNESS, cORREcTLY FITTED AND

ADJUSTED, WITH YOUR cHILD IN THIS SEAT

TO SECURE YOUR CHILD IN THE HARNESS:

FIGURE O

44. Slide the shoulder strap buckle (1) into the housing of the

waist strap buckle (2), forming a complete buckle

45. Repeat for the opposite side.

46. Insert the completed buckle (3) in the buckle housing (4) until

it engages securely in place.

47. Repeat for the opposite side.

48. Carefully adjust the harness straps to snugly t your child

by adjusting the Sliders located on all Shoulder Straps, Waist

Straps and the Crotch Strap (5).

Your harness can be adjusted for even more comfort for smaller or

larger children by threading the harness webbing through the

adjusting ‘sliders’ in either direction, you can change the length

of the webbing thus making them tighter or looser over your

child’s torso.

The harness should be snugly tted to the baby’s body, tight

enough so that the baby cannot wriggle itself free of the straps

but loose enough so as not to cause the baby any discomfort.

TO OPEN YOUR HARNESS

49. Press down rmly on the button in the center of the buckle

housing (4). The waist and shoulder strap sections will spring

free of the buckle housing.

50. If they do not automatically release, slide the shoulder strap

buckles (1) free from the waist strap sections. This is to ensure

that they do not form a potential entrapment area.

51. Your harness will separate into 5 sections

IMPORTANT WARNING: WHEN NOT IN USE DISCONNECT SHOULDER

STRAPS FROM THE WAIST STRAP AND/OR BUCKLE.

BRAKES

FIGURE N - USING YOUR BRAKES

49. Press down on the red brake lever located on the rear axle to

simultaneously engage the brake in both rear wheels.

50. To release, simply lift the red brake lever with your foot.

IMPORTANT WARNING: ALWAYS TEST THAT THE BRAKES ARE SECURELY

ENGAGED BEFORE USE.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Valco Baby Rebel Q Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info