9
VALERA is a registered trade mark of Ligo Electric S.A. - Switzerland
The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or the shop where
you purchased the product.
CARE AND MAINTENANCE (fig.3, 4 and 5).
The cleaning and maintenance procedure must be carried out after every use.
•Switch OFF the appliance and disconnect it from the mains supply before performing any maintenance
or changing any parts.
•Never immerse the appliance in water!
•After every use, remove the guide comb then use the small brush to eliminate any hair from the cutting
head and its seat.
•Clean the outside of the appliance with a soft cloth (slightly damp if necessary). Never use solvents or
abrasive detergents!
•Remove the cutting head (fig. 3) and evenly oil the blades and the seat of the motor pin which is located
on the inside (fig. 5, rif. 1 and 2).
•If after prolonged use, and despite regular cleaning and lubrication, the cutting ability of the appliance
appears to be diminished, the cutting head must be replaced.
ADAPTER’S TECHNICAL SPECIFICATION
ZZU1001-200040-2E
ZZU1001-200040-2U
Input: 100-240V~ 50/60 Hz 0.5A Max
Output: +4.0VDC 2.0A 8.0W
Manufacturer declared average active efficiency: > or = 78.0%
Manufacturer declared No-load power consumption: < or = 0.07W
DISPOSAL
The appliance must be disposed of in compliance with applicable environmental standards.
This appliance conforms to European Directives 2014/30/EU, 2014/35/EU, 2011/65/EU,
2015/863/EU, 2009/125/EC, 2012/19/EU and Regulation (EU) N. 2019/1782.
GUARANTEE
VALERA guarantees the appliance you have bought at following conditions:
1. The guarantee conditions for this appliance are as defined by our dealer in the country of sale.
In
Switzerland and the countries of the European Union, the warranty period is 24 months if the final purchaser is a
private person (domestic use) and 12 months if the final purchaser is a company or business or professional
(professional use).
The guarantee period starts from the date of purchase as stated on the present
guarantee card regularly filled out and stamped by the dealer or on the sale’s invoice.
2. The guarantee is applicable only against submission of the present guarantee card or the sale’s invoice.
3. The guarantee covers the elimination of all defects arisen during the guarantee period resulting from
proven faults in material or workmanship. The elimination of the defects will be made either by repairing
the appliance or exchanging it. The guarantee does not cover any damage arising from incorrect
connection to the power supply, improper use, breakage, normal wear and non-compliance with the
Instructions for Use.
4. All other claims of any nature, including those for eventual damages outside of the appliance, are
excluded, unless our liability is legally mandatory.
5. The guarantee service is carried out free of charge; it does not affect the expiry date of the guarantee.
6. The guarantee becomes void if repairs are undertaken by unauthorized persons.
For UK only: this guarantee in no way affects your rights under statutory law.
In case of defect, please return the appliance well packed and together with the guarantee card regularly
dated and stamped to one of our Valera Service Centres or to the dealer who will send it to the official
importer for the guarantee service.
