Bedienungsanleitung Valera Valera Premium 1600 (Seite 3 von 78) (Alle Sprachen)

821560

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

INSTALLATION INSTRUCTIONS

Wall holder for hairdryer

Type 036 - 038A - 038B

Type 036

Front housing model.

Type 038A

Vertical housing model.

Type 038B

As the 038A but with no switch.

Installation of wall holder

This wall holder must only be installed by a qualified electrician

in conformity to applicable safety standards.

The wall holder may be installed in one of two ways:

A = for fixed connection lead

B = for mobile connection lead

Attention: before installing the wall holder always switch off

the general switch of your mains electricity.

For each pole a switch with a minimum break distance between

contacts of 3 mm must be fitted up-line of the appliance.

Each time the appliance is opened, the switch must be used to

disconnect the appliance.

The connection wiring must be at least type H05VV-F

2x1,0 mm2.

Method A

IMPORTANT: Refer to the figures for the model you have

purchased.

1.Unscrew the screw (1) (fig. 1) and remove the cover from the

wall unit.

2.Break the plastic membrane (3) at the back of the wall unit

(fig. 3A).

3.Route the main power cable from the wall (4) through the

hole left by the plastic membrane (3) (fig. 3A).

4.Fix the back of the wall unit to the wall using the fixing screws

and wall plugs provided (fig. 2).

5.Remove the terminal strip (5). The input power cable (4) and

the output power cable (9) of hairdryer with max input current

of 10A,if not already connected, must be connected to the

terminal strip(5).

In mod. 036 the Neutral output cable(9) must be connected

to terminal strip(5) and the Line output cable (9) to terminal

strip (11).

6.Reposition the terminal strip. Tighten the cable clamp

(6 and 10) with its own screws. (fig. 3A). IMPORTANT: This

appliance is double insulated and has no ground (earth)

connection.

7.Fit the cover back on the wall unit with (1) (fig. 1).

8.Switch the power on at the mains switch. The hair dryer is

now ready to use.

Method B

IMPORTANT: Refer to the figures for the model you have

purchased.

1.Unscrew the screw (1) (fig. 1) and remove the cover from the

wall unit.

2.Break the plastic membrane (7) (fig. 3B).

3.Fix the back of the wall unit to the wall using the fixing screws

and wall plugs provided (fig. 2).

4.Route the input power cable (8) and the output power (9)

into the holes (fig. 3B).

5.Remove the terminal strip (5). The input power cable (8) and

the output power cable (9) of hairdryer with max input current

of 10A,if not already connected, must be connected to the

terminal strip(5).

In mod. 036 the Neutral output cable(9) must be connected

to terminal strip (5) and the Line output cable (9) to terminal

strip (11).

Reposition the terminal strip. Tighten the cable clamp (6 and

10) with its own screws. (fig. 3B). IMPORTANT: This appliance

is double insulated and has no ground (earth) connection.

6.Fit the cover back on the wall unit with (1) (fig. 1).

7.Switch the power on at the mains switch. The hair dryer is

now ready to use.

INSTRUCTIONS FOR USE

Hairdryer with wall holder

Control Switches

Control switch on wall holder

(only for models equipped with a switch) rif. 2 fig. 1:

0-1 = Off/On

Hairdryer

Type 533.03 - 533.05 - 533.03/I - 533.05/I

542.05 - 542.06 - 542.14 - 561.22

Pushbutton:

ON=On/Off

(pressure must be maintained to operate the hairdryer)

•Allow your appliance to cool before storing away and do not wrap the supply

cord around the hairdryer in storage.

•The A-weighted sound pressure level of the hairdryers for commercial use is

below 70 dB(A).

• Designation of the appliance (see technical product specifications)

WALL-MOUNTED HAIRDRYER FOR COMMERCIAL USE

00060721 int_dic2016:Layout 1 13/12/2016 8.36 Pagina 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Valera Valera Premium 1600 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info