Bedienungsanleitung Valera Valera SwissX PulseCare (Seite 3 von 82) (Alle Sprachen)

821521

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

•After use always switch the unit off and remove the plug from the

power supply socket. Do not pull on the wire to remove the plug

from the power supply socket. Do not pull the plug out of the

power supply socket when your hands are wet.

•Always allow the unit to cool before putting it away and never

wrap the cord around the unit.

• Check that the cord has not been damaged from time to time.

• Prevent the cord from coming into contact with the metal parts

while these are still hot.

• Use the unit on dry hair.

• Do not use this unit on wigs that have synthetic hair.

•The elements used to pack the unit (plastic bags, cardboard box,

etc.) must be kept out of reach of children as they are a potential

danger to them.

•This unit must only be used for the purposes for which it is

expressly intended. Any other use is to be considered improper

and therefore dangerous. The manufacturer accepts no

responsibility for damage caused by improper or erroneous use.

• Do not use hair spray while the unit is running.

•Keep the plates clean and free of dust, hair spray, styling gel,

etc.

•To avoid dangerous overheating, it is advisable to unwind the

entire length of the cord.

•The A-weighted sound pressure level of the hair straighteners

for professional use is below 70 dB(A).

•Designation of the appliance (see technical product

specifications)

HAND-HELD HAIR STRAIGHTENER FOR PROFESSIONAL USE

OPERATING INSTRUCTIONS

Parts (Fig. 1,2)

1. Appliance

2. Straightening plates

3. ON-OFF and temperature control switch (Type

101.20, 101.20/I, 101.30, 101.30/I)

4. Display (Type 101.20, 101.20/I, 101.30, 101.30/I)

5. ON-OFF switch (Type 101.03, 101.03/I, 101.04,

101.04/I, 101.31, 101.31/I, 101.32, 101.32/I)

6. ON-OFF indicator light (Type 101.03, 101.03/I,

101.04, 101.04/I, 101.31, 101.31/I, 101.32,

101.32/I)

7. Thermocap accessory

Switching the appliance on and

off

Type 101.20, 101.20/I, 101.30, 101.30/I

To switch the appliance on, simply plug it in to an

electrical socket, then press and hold the ON-OFF

switch (fig. 1, ref. 3) for one second. Appliance power-

on is indicated by a short beep.

To switch it off, press and hold the ON-OFF button (fig.

1, ref. 3) for 2 seconds again and remove the plug from

the socket. Power-off is indicated by a beep.

Type 101.03, 101.03/I, 101.04, 101.04/I, 101.31,

101.31/I, 101.32, 101.32/I

To switch on the appliance, simply plug it into a mains

power socket and set the switch (fig. 1, ref. 5) to I. To

switch it off, set the switch (fig. 1, ref. 5) to 0 and

unplug it.

Temperature settings

Only for Type 101.20, 101.20/I, 101.30, 101.30/I

To select the temperature setting, after switching on the

appliance press the ON-OFF button one or more times

(fig. 1, ref. 3) until the desired temperature appears on

the display (fig. 1, ref. 4). The set value flashes until the

selected temperature has been reached.

You can choose different temperatures according to hair

type, from the minimum setting of 120°C (250°F) to a

maximum of 230°C (450°F).

Wait for the selected temperature to be reached, then

begin styling the hair.

AUTOMATIC DEACTIVATION OF

SAFETY and “HOT” FUNCTION

Only for Type 101.20, 101.20/I, 101.30, 101.30/I

The appliance switches off automatically 60 minutes

after it was switched on or after the last temperature

setting was selected.

When this time has elapsed, 5 beeps will sound to

indicate that the appliance is switching itself off. While

these beeps are sounding, if you want to carry on using

the appliance for another 60 minutes, press the ON-OFF

button (fig. 1, ref. 3).

When the 60-minute period has elapsed, if the power

button (fig. 1, ref. 3) is not activated again, a longer

beep (2 sec.) indicates that the appliance has switched

off and the straightening plates (fig. 1, ref. 2) begin to

cool down; the temperature of 120°C (250°F) flashes

on the display until the metal plates have cooled enough

that they would not cause burns on contact. (“HOT”

function).

00060796 int 2020_04_Layout 1 20/04/2020 12:07 Pagina 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Valera Valera SwissX PulseCare Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info