794661
25
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
© TIMYO B.V. TIMYO USER MANUAL EN SKO52021V2 PAGE 25
MANUAL VANDIJCK E-BIKES VD0.1
5.2.21 Display software information
PLEASE NOTE: All data under this item cannot be changed and can only be viewed.
When the system is switched on, short-press twice to open the 'MENU'. Press
repeatedly until 'dSc (Display Software check)' appears on the display (as
shown opposite). Once you have viewed the desired information, short-press
twice to save your choice and return to the main screen, or short-press
once to go to the next item 'BMS hardware information'.
5.2.22 BMS hardware information
PLEASE NOTE: All data under this item cannot be changed and can only
be viewed.
When the system is switched on, short-press twice to open the 'MENU'. Press
repeatedly until 'bHc (BMS Hardware check)' appears on the display (as
shown on the right). Once you have viewed the information you need,
short-press twice to save your choice and return to the main screen, or
short-press once to go to the next item 'BMS software information'.
5.2.23 BMS software information
PLEASE NOTE: All data under this item cannot be changed and can only
be viewed.
When the system is switched on, short-press twice to open the 'MENU'. Press
repeatedly until 'bSc (BMS Software check)' appears on the display (as shown
opposite). Once you have viewed the information you need,
short-press twice to save your choice and return to the main screen, or
short-press once to go to the next item ‘Sensor hardware information’.
5.2.24 Sensor hardware information
PLEASE NOTE: All data under this item cannot be changed and can only
be viewed.
When the system is switched on, short-press twice to open the 'MENU'. Press
repeatedly until 'SHc (Sensor Hardware check)' appears in the display (as
shown opposite). Once you have viewed the information you need, short-press
twice to save your choice and return to the main screen, or short-press
once to go to the next item 'Sensor software information'.
PLEASE NOTE: This information will not be displayed if no torque sensor is present
in the drive system.
!
!
!
!
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Van Dijck Timyo E-pack wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Van Dijck Timyo E-pack

Van Dijck Timyo E-pack Bedienungsanleitung - Deutsch - 72 seiten

Van Dijck Timyo E-pack Bedienungsanleitung - Holländisch - 72 seiten

Van Dijck Timyo E-pack Bedienungsanleitung - Französisch - 72 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info