Bedienungsanleitung Vaporetto 3000 eco pro (Seite 9 von 12) (Englisch)

382344

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

VAPORETTO ECO PRO 3000

• Do not leave the iron unattended whilst

connected to the mains.

• Iron only on heat resistant surfaces and on

surfaces that allow the steam to escape

e.g. MESH ironing boards.

• ATTENTION: if you iron sitting down, do

not place your legs under the ironing board,

the steam can cause burns.

WARNINGS

• DO NOT USE ON leather, wood or delicate

fabrics especially dralon, velvet and other

pile surfaces.

• For cleaning leather, wood or delicate fa-

brics especially dralon, velvet and other pile

surfaces, consult the manufacturers in-

structions. Clean only by using the hand

gun at a safe distance together with a soft

cloth and always do a test on a non visible

part of the item first or on a sample.

Allow the test area to dry completely before

observing results and effects on surface or

colour before proceeding to clean further

areas.

• For cleaning wood surfaces (furniture,

doors etc.) take great care as a too long ap-

plication of the steam could alter the waxed

appearance, the shine or the colour of the

surfaces cleaned. We therefore recom-

mend you to apply the steam on such sur-

faces only for brief periods or to clean these

surfaces using a cloth first held in the

steam.

• Please pay particular attention while clea-

ning brick floors: a too long application of

steam could damage wax, brightness or co-

lour of these surfaces.

• For delicate surfaces (e.g. synthetic mate-

rials, lacquered surfaces etc.) we recom-

mend that the small brush should always

be covered with at least two cloths to re-

duce the intensity of the steam, and (on

machines with steam variation control) with

the steam set at low level. Always test first

on a non-visible area, allow to dry thorou-

ghly, and if successful, make sure to use

exactly the same tool, technique, steam le-

vel and steam jet distance.

• If cleaning glass surfaces in particularly low

temperatures preheat the glass using the

hand gun from about 50 centimetres di-

stance from the surface to be cleaned.

• For care of your plants vaporise at a mini-

mum distance of 50 centimetres.

STEAM GUN (2)

The steam gun can be used directly on all

spots requiring a stronger, closer treatment

without connecting the brushes. The more re-

sistant the stain, the closer you should hold

the gun, the steam pressure and temperature

being higher at the source. Always wipe with

a dry cloth (or a slightly abrasive sponge if the

spot is a difficult one to remove) after using

the gun. Steam gun is particularly efficient at:

• breaking down rug and carpet stains before

they are treated with the large brush;

• cleaning stainless steel surfaces, panes,

mirrors, enamelled surfaces;

• cleaning hard-to-reach corners, such as

stairs, window sills, door posts;

• cleaning cooking top knobs, taps bases

• cleaning window shutters, heaters, car inte-

riors;

• spraying plants (from a distance);

• removing odours and creases from clothes.

To reach higher points, the steam gun can be

connected to one or both extension tubes.

LARGE BRUSH (8)

To wash floors, put a clean, dry kitchen cloth

under the brush and swing back and forth

without applying any pressure. Use the other

side of the cloth when the first one is impre-

gnated with dirt. Use the brush directly

without the cloth on particularly dirty or incru-

sted areas and in spaces between the tiles:

swing the brush sideways to detach the dirt.

Highly obstinate stains may require a steam

gun treatment before the brush and cloth are

used (an old bath towel is an ideal cloth) . Ap-

ply the same procedure to ceilings and verti-

cal surfaces, like wallpaper. The cloth can ea-

sily be fastened around the brush and held in

place by the 4 clips (9) on the brush itself.

Smooth cotton cloths are suitable for the

treatment of glass surfaces: fasten the cloth

around the brush then pass it over the win-

dow pane (or mirror) to remove the greasy

film. Finally, spray the surface with the steam

gun and wipe dry with a clean cloth. In cold

VT ECO PRO 3000 M0S07067 - 1O04:VT 2300 M0S05357 1L05 06/05/2008 10.31 Pagina 48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vaporetto 3000 eco pro Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info