Bedienungsanleitung Varde Aura 11 (Seite 4 von 12) (Englisch)

813302

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

User Instructions

3. Chimney Sweeping

3.1 To maintain safe and efficient use of the appliance, the

chimney/flue must be inspected and swept at least once a

year by a qualified chimney sweep*.

If the appliance is used continuously throughout the year,

or it is used to burn wood, more frequent sweeping is

recommended.

The best time to have the chimney swept is at the start of

the heating season.

3.2 The chimney, any connecting flue pipe and the appliance

flue ways, if incorporated, must be regularly cleaned.

3.3 Ensure adequate access for cleaning where it is not

possible to sweep through the chimney.

3.4 If the chimney is believed to have previously served an open

fire it must be swept a second time within a month of regular

use after installation.

4. Annual Service

4.1 Before the start of the heating season strip, inspect and

clean the appliance as detailed:

—Allow appliance to cool.

—Remove all internal parts. Take care handling firebricks (if

applicable) as they can become fragile after a period of use.

—Sweep the appliance chimney/flue at this point if

necessary.

—Vacuum clean any remaining ash and debris from the

inside of the appliance. Stovax offer a filter/collection

attachment for vacuum cleaners to protect them from fire

ash: Ash Clean (Stovax Part No. 2091).

—Check the parts for any damage. Replace any damaged

parts using only genuine replacements parts.

— Check and clean the firebricks (if applicable) with a soft

brush.

Some surface damage will occur during use. The life of the

bricks will depend on the type of fuels burnt and the level of

use. Replace damaged bricks as soon as possible.

— Re-fit cleaned internal parts.

4.2 On appliances with printed glass do not use cleaning

agents that have a high alkaline or acidic content, for

example Stovax Gel Cleaner, these are aggressive

cleaning agents designed to be used with heavily

stained clear glass. On printed glass surfaces, use

Stovax Glass Cleaner (Stovax No.4103) which is better

formulated for this application.

— Before applying a cleaning agent remove any dust and

loose soot with a damp cloth.

— Use an appropriate glass cleaner. Apply the cleaning fluid

to a cloth before rubbing onto the glass.

Apply carefully and do not apply excessively. Try to

prevent any run off which could soak into the rope seals

around the edge of the glass.

Soot can also contain acidic particles that can cause

corrosive damage to printed glass.

— Remove dirt with a moist cloth and buff dry.

— Before relighting the appliance ensure the glass is fully

dried.

If the rope seal has absorbed excess cleaning agent

it is advisable to replace the rope as soon as possible to

preserve the printed finish of the glass.

4.3 Check door rope seal and replace if required.

4.4 Lightly oil the door catch mechanism and hinge pins.

Avoid getting oil onto the door seals and glass.

4.5 To refresh painted finishes a touch up spray is available.

Contact your retailer quoting the model and serial number

found on the appliance date badge.

4.6 Use genuine replacement parts to keep the appliance in

safe, efficient working order:

These products, along with regular maintenance and use

of correct fuels, will keep the appliance in the best possible

condition.

4.7 For more information about the Stovax Group products

please visit our web site at www.stovax.com

4.8 Burn at a low temperature for the first day of use after any

maintenance. This allows the seals, fixing glues and paint to

fully cure.

4.9 During this time the appliance may give off some unpleasant

odours. Keep the room well ventilated to avoid a build-up of

fumes.

4.10 Your retailer can carry out service and maintenance if

required.

5. Seasonal Use

5.1 Clean and service the appliance if not used during the

warmer months, as detailed in the Annual Service section.

5.2 Set the air controls open to 50% to keep the appliance venti-

lated and stop the build-up of any moisture inside.

5.3 Before re-lighting the appliance:

—Remove the baffles.

—Clear any debris that may have accumulated.

—Check the flue is clear of any blockages.

*Registered on the Competent Persons Scheme (GB

only) see page 34/ INFO (Republic of Ireland).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Varde Aura 11 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Varde Aura 11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info