Bedienungsanleitung Varde Shape (Seite 6 von 24) (Englisch)

813318

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Important:

Before installation and/or use of this appliance

please read these instructions fully and carefully

to ensure that you have fully understood their

requirements. Contact your local building

authorities or Varde Ovne supplier if you are

ensure of the existing regulations regarding the

installation of your stove.

Installation Inspection:

The installation must be approved by a suitably

qualified person before initial use.

This Varde Ovne stove has passed the Danish/

European standard DS/EN13240 Norwegian

(NS) and the German (Stufe 2) testing, and has

been proved to be an environmentally friendly

product.

Regulations:

All local regulations, including those referring to

national and European Standards need to be

complied with when installing the appliance.

All Varde Ovne stoves are closed replaces.

The stove is designed for intermittent use and

can be connected to a chimney system used by

other appliances, providing that the appropriate

rules and regulations are met.

Outer casings, fronts and glass panels become

extremely hot during operation and will result in

serious injury and burns if touched. It is therefore

recommended that a fireguard complying with

BS 8423 (Latest Edition) is used in the presence

of young children, the elderly or infirm.

Varde Ovne offer firescreens, sparkguards

and hearthgate systems for protection. Your

Varde Ovne dealer can advise you about these

products.

Do not place photographs, TV’s, paintings,

porcelain or other combustible items on the

wall or near the appliance. Exposure to hot

temperatures will cause damage. Do not place

furniture or other items such as drying clothing

closer than 1m from the front of this appliance.

WARNING: Extra fuel should not be stored on

or next to the appliance. Only keep enough fuel

for immediate use nearby and never leave the

appliance unattended for long periods with any

combustible material in close proximity.

Extractor fans or cooker hoods must not be

placed in the same room or space as this can

cause appliance to emit fumes into the room.

Do not make unauthorised changes to the

appliance.

Do not connect, or share, the same flue or

chimney system with another appliance.

Installation:

It is recommended that you contact your local

building authorities or Varde Ovne supplier

if you are unsure of the existing regulations

regarding the installation of your stove, as there

may be specic requirements which need to

be considered. You should also receive the

relevant installation instructions and read and

understand them prior to installation.

Please Note:

Prior to installation store the stove in a cool dry place and do not expose to moisture, the stove is not

water resistant.

Check, if installing into an existing chimney, that it is suitable for a modern stove.

The vermiculite rebricks are delicate and should be handled with care - place logs carefully

with a gloved hand when refuelling to avoid damage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Varde Shape Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Varde Shape

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info