Bedienungsanleitung Varde Shape (Seite 15 von 24) (Englisch)

813318

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Maintenance:

Like any appliance under regular use, the stove will require routine maintenance.

Clean and inspect the appliance regularly, especially in periods of heavy use. Regular cleaning and

maintenance will help give many years of safe use.

Allow appliance to cool thoroughly to avoid risk of burns.

Clean regularly, according to level of use. Remove ashes, soot and tar from the combustion chamber.

The bafe should be removed for cleaning as the reverse side will be covered in soot. Do not allow ash

to build up as it may cause damage and adversely effect the performance of the appliance.

Warning: Ash can remain hot long after appliance has been in use.

Check that the smoke pathway through the ue pipe is clear. Inspect the rope seals in the door and

ashpan ensuring they still from a seal. Lubricate the door hinges if required.

Door Glass:

Keep the glass clean with correct use of the Airwash system and good quality fuel. Use the boost

setting to clear any build up. Sometimes additional cleaning may be required.

Before undertaking this operation allow appliance to cool fully. DO NOT clean hot glass.

The door glass should be cleaned using Varde Ovne glass cleaner, which should be available from

you local Varde Ovne dealer.

Before applying a cleaning agent remove any dust and loose soot with a damp cloth. Apply the

cleaning uid to a cloth before rubbing onto the glass. Apply carefully and do not apply excessively.

Do not apply directly onto the glass. Try to prevent any run off which could soak into the rope seals

around the edge of the glass. Remove dirt with a moist cloth and buff dry.

Some types of wood and solid fuel can cause a white residue to form on the glass. If this occurs

it should be cleaned off at least once a week during periods of heavy usage. If the liquid cleaning

agents recommended do not remove this residue use a dry cleaning pad which will help remove

these white marks.

Wood burns best on a bed of ash.

Do not allow ash to build up in the appliance as it will not burn properly and may cause

damage.

Open door, see Diagram on page 5. Remove ash with a small shovel. Take care not to damage the

ceramic lining of the appliance. Do not use sharp pointed pokers. Remove ash carefully - heat can

remain long after use. Pace the ash into a suitable container. Do not place hot ash in a container

made from plastic or any other combustible material.

If in doubt on how to clean your stove, contact your local Varde Ovne dealer or chimney sweep.

It is especially important to check the stove and chimney for blockages after a long period of non-use.

The enamel surface of the stove can wear down in places if the appliance is overheated. Worn

surfaces can be repaid with a Senotherm® spray paint, available from your local Varde Ovne dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Varde Shape Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Varde Shape

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info