POWDPG75560 EN
Copyright © 2021 VARO P a g e | 9 www.varo.com
8.2 Insertion of battery (Fig. 1)
WARNING Always remove battery pack (9) and key (2) from your tool when
you are assembling parts, making adjustments, cleaning, or when not in use.
Removing battery pack and key will prevent accidental starting that could
cause serious personal injury.
▪ Raise the battery cover (5).
▪ Place the battery pack (9) in the mower.
▪ Align raised ribs on battery pack with grooves in the mower’s battery port.
▪ Push down into battery compartment until the battery clicks into place.
▪ Lower the battery cover.
WARNING: Make sure the latch on the top of the battery pack snaps in place
and the battery pack is fully seated and secure in the mower’s battery port
before beginning operation. Failure to securely seat the battery pack could
cause the battery pack to fall out, resulting in serious personal injury.
8.3 To remove battery pack
▪ Raise the battery cover (5).
▪ Press and hold the battery latch button at the top of the battery pack.
▪ Remove battery pack (9) from the mower.
WARNING To avoid serious personal injury, always remove the battery pack
and key when carrying or transporting the tool.
8.4 Battery capacity indicators (Fig. 2)
There are battery capacity indicators (12) on the battery pack, you can check the capacity status
of the battery if you squeeze the button (13). Before using the machine, please press switch
trigger to check if the battery is full enough for properly working.
Those 3 LED might show the status of the capacity level of the battery:
▪ 3 LED’s are litt: Battery fully charged.
▪ 2 LED’s are litt: Battery 60% charged.
▪ 1 LED is litt: Battery almost discharged.
9 ASSEMBLY
9.1 Unfolding and adjusting handle assembly
▪ Insert both lower handles (6) in the mower body and fix it with the supplied screws. (Fig. 3)
▪ Attach the upper handle (7) and tighten with both wing nuts. (Fig. 4 – Fig. 5)
NOTE: If the lower handle is difficult to move, turn the lower handle locks
counterclockwise to free the handle.
NOTE: If the lower handle (6) is loose or does not seat completely in the slot,
turn the lower handle locks clockwise to secure the handle.
NOTE: If the upper handle (7) is loose or separated from the lower handle,
tighten the knobs on the upper handle locks by turning them clockwise.
