Bedienungsanleitung Varo POWX07583 (Seite 7 von 16) (Englisch)

756782

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

POWX07583 EN

not sawing any twisted or skewed wood pieces, or pieces that do not have a straight edge

for moving along the rip fence, in a longitudinal direction.

 Do not carry out any free-hand operations. Free-hand means that you use your hands for

supporting the workpiece, or for leading it with your hands, instead of using the rip fence

or the mitre block.

 NEVER bend over or around the saw blade. NEVER reach for a workpiece, before the

saw blade has come to a complete stop.

 Avoid a sudden or too quick infeed of a workpiece. Workpieces made of hard material

should be fed in as slowly as possible. Never fold or turn a workpiece while feeding it into

the saw. If the saw blade jams or ceases to turn while the workpiece is being fed in, turn

the equipment off immediately. Remove the plug from the socket. Remove the piece that

is blocking the saw.

 NEVER try to remove sawed off chips, and never touch a saw blade guard, as long as the

saw blade is turning.

 Remove all lose knots from the workpiece, BEFORE starting to saw.

 Do not maltreat the cable. Never pull on the cable, for removing the plug from the socket.

Do not expose the cable to heat, oil, water or sharp edges.

 Some types of dust that is generated while working with the saw may contain chemicals,

which can cause cancer, birth defects or other genetic damages. Some examples of these

substances are:

 Lead derived from paints containing lead;

 Arsenic and chrome from chemically treated wood.

 The hazard to your health from such exposures is dependent on how frequently you do

this kind of work.

 Measures for reducing your exposure to such chemicals: Always work in well-ventilated

surroundings and with certified safety equipment, such as dust masks that have been

specially designed for filtering out microscopic particles.

 For sawing operations, connect the equipment to a dust exhaust system.

 The saw blade guard may be lifted up while positioning a workpiece, or for easier access

during maintenance works. Make sure that the saw blade guard has been lowered and is

positioned flat against the sawing table, before connecting your tool to the mains supply.

7 ELECTRICAL SAFETY

Check the voltage that is documented on the type plate of the machine, to

make sure that it corresponds to the locally available mains voltage.Safety

class II.

8 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS

Laser beam warning.

Laser beam characteristics.

 Warning! The laser beam potentially causes severe eye damage. Never look or stare

directly into the laser beam.

 During use, do not point the laser beam at people, directly or indirectly through reflecting

surfaces.

 This laser complies with class 2 according to EN 60825-1:2014. The unit includes no

servicing components. Do not open the housing for any reason. If the unit is damaged,

have the damage repaired by an authorized repair agent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Varo POWX07583 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Varo POWX07583

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info