Bedienungsanleitung Vauxhall Agila 2011 (Seite 2 von 2) (Englisch)

529245

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Vehicle features Vehicle features Vehicle features

Longitudinal seat adjustment:

Pull handle, slide seat, release

handle.

Danger:

Do not sit nearer than 10 inches

(25 cm) from the steering wheel, to

permit safe airbag deployment.

Seat backrests:

Pull release lever on side of seat,

move seatback to a suitable

position and release lever to lock.

Do not lean on the seatback whilst

adjusting it.

Head restraint adjustment:

Press the release button, adjust

height and engage.

The upper edge of the head

restraint should be level with the

top of the head.

Seat belt:

Withdraw seat belt from retractor,

guide it untwisted across the body

and insert latch plate in belt buckle.

To release belt, press red button on

belt buckle.

Seat belt height adjustment:

1. Pull belt out slightly.

2. Pull out lock knob.

3. Adjust height and engage.

Seat position:

Sit with buttocks as far back

against backrest as possible.

Adjust distance between seat and

pedals so that legs are slightly

angled when depressing pedals.

Sit with your shoulders as far back

against the backrest as possible.

Set the backrest rake so that you

can easily reach the steering wheel

with your arms slightly bent.

Interior mirror:

To reduce dazzle, adjust the lever

on the underside of the mirror

housing.

Electrical exterior mirrors:

Select the relevant exterior mirror

by turning the selector switch to left

(L) or right (R). In the central

position no mirror is selected.

The mirror glass swivels in the same

direction as the activation of the

selector switch.

Return the selector switch to the

central position to prohibit further

adjustment.

Steering wheel adjustment:

Unlock the lever, adjust the

steering wheel, then engage the

lever and ensure it is fully locked.

Adjust only when vehicle is

stationary and steering wheel lock

is released.

Parking brake:

To release parking brake, raise

lever slightly, press release button

and lower lever fully.

Always apply parking brake firmly

without operating the release

button and apply as firmly as

possible on an uphill or downhill

slope.

To reduce the operating forces of

the parking brake, depress the

brake at the same time.

Hazard warning flashers:

Operated with the ¨

button.

On = Press ¨

Off = Press ¨ again

Manual transmission:

Reverse gear: With vehicle

stationary, wait 3 seconds after

depressing clutch pedal, then pull

up the button on the selector lever

and engage the gear.

Automatic transmission:

P = park

R =reverse

N =neutral

D =drive

The selector lever can only be

moved out of P or N when the

ignition is on and the foot brake is

depressed (selector lever lock).

To engage P or R, push button on

selector lever.

When position N is selected,

depress foot brake or engage

parking brake before starting.

Automatic transmission

continued:

The mode or selected gear is shown

in the transmission display.

Selecting D puts the transmission in

automatic mode. Only select 3, 2 or

L to prevent automatic upshifting

above the selected gear or as an

aid to engine braking.

For vehicles with automatic

transmission, the key can only be

removed when the selector lever is

in P.

Light switches:

Rotate end of lever:

8 = Sidelights

9 = Headlights: high and low

beam

OFF

= Off

Turn adjustment band:

r = Rear fog lights

Operate switch on instrument

panel:

> = Front fog lights

? = Headlight range adjustment

Correct headlight adjustment

reduces dazzle for other road

users. With low beam on, adjust to

suit vehicle load.

Headlight flash, high beam and

low beam:

Headlight flash = Pull lever

towards

steering wheel

High beam = Push lever

forwards

Low beam = Pull lever back

towards

steering wheel.

Control indicator C illuminates in

instrument cluster when high beam

and headlight flash is on.

Switching on rear fog light:

Turn adjustment band to r;

r illuminates in instrument cluster.

Turn and lane-change signals:

Lever up = Right turn signal

Lever down = Left turn signal

If the lever is moved past the

resistance point, the turn signal is

switched on constantly. When the

steering wheel is moved back the

turn signal is automatically

deactivated.

For three flashes, e.g. when

changing lanes, press the lever until

resistance is felt and then release.

Move lever to resistance point and

hold for longer indication.

Switch the turn signal off manually

by moving the lever slightly.

Windscreen wiper:

Move lever up or down:

MIST = Misting function

OFF = Off

INT = Intermittent operation

LO = Slow

HI = Fast

Move lever up from position OFF:

Single swipe.

Warning:

In freezing conditions, wiper blades

can freeze to the windscreen.

Release wiper blades from the ice

before operating the windscreen

wiper, to prevent wiper motor

damage.

Windscreen wash:

Pull lever. Wash fluid is sprayed

onto the windscreen and the wiper

wipes for a few strokes.

On vehicles with intermittent wipe

position INT, the wiper switches on

automatically at low speed if it is

not already activated.

Rear window wiper/wash:

Rotate end of lever:

f = Wash

ON = Wiper on

INT = Intermittent operation

OFF = Wiper off

f = Wash

Wash fluid is sprayed on to rear

window when the end of the lever is

turned to position

f. When

released, it springs back to ON/

OFF, as appropriate.

Seat height:

Lever pumping motion

up = seat higher

down = seat lower

Vauxhall Agila 2011 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info