Bedienungsanleitung Vauxhall Cascada 2013 (Seite 1 von 2) (Englisch)

529295

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Vehicle features

Cascada

Quick Reference Guide

Refer to Owner’s Manual for detailed information.

Illustrations may depict left-hand drive vehicles.

Operation is similar for right-hand drive vehicles.

Depending on the model variant, special equipment

and accessories, the scope of equipment on your

vehicle may differ from the descriptions in this guide.

KTA-2762/1 August 2013

*KTA-2762-1*

Vehicle features Vehicle features

Unlocking

Press button c to unlock doors,

boot lid and fuel flap. Press and

hold button c to open the soft top

and the windows.

Locking

Close doors, boot lid and fuel filler

flap. Press button e. Press and hold

button e to also close the soft top

and the windows.

Press button e on the remote

control twice briefly within

15 seconds to deadlock all doors

and activate anti-theft alarm

system.

The vehicle can also be configured

to unlock only the driver’s door,

boot lid and fuel filler flap when

pressing button c once on the

remote control. Pressing button c

twice will unlock the entire vehicle.

Electronic immobiliser:

Activated automatically when key

is removed from ignition switch.

1. Power windows

2. Exterior mirrors

3. Cruise control, speed limiter,

forward collision alert

4. Side air vents

5. Turn signals, headlight flash,

low beam, high beam, high

beam assist, exit lighting,

parking lights, buttons for

Driver Information Centre

6. Instruments

7. Steering wheel controls

8. Driver Information Centre

9. Wiper and washer systems

10. Central locking system,

hazard warning flashers,

Sport mode, Tour mode,

LEDs for front passenger seat

belt and airbag deactivation

11. Info-Display

12. Anti-theft alarm system LED

13. Centre air vents

14. Glovebox, fusebox

15. Traction Control system,

Electronic Stability Control,

parking assist,

lane departure warning,

ECO button (stop-start system)

16. Climate control system

17. AUX input, USB input

18. Power outlet

19. Soft top operation switch,

central window switch

20. Selector lever

21. Parking brake

22. Ignition switch with

steering wheel lock

23. Horn, driver airbag

24. Bonnet release lever

25. Storage compartment

26. Steering wheel adjustment

27. Light switch, fog lights,

headlight range adjustment,

instrument illumination

Manual transmission:

Reverse: With vehicle stationary,

wait 3 seconds after depressing the

clutch pedal, then press release

button on selector lever and

engage gear.

If the gear does not engage, set the

lever to neutral, release the clutch

pedal and depress again; then

repeat gear selection.

Do not slip the clutch unnecessarily.

When operating, depress clutch

pedal fully. Do not use the pedal as

a foot rest.

Automatic transmission:

P =Park

R =Reverse

N =Neutral

D = Automatic (drive) mode

with all gears.

The selector lever can only be

moved out of P when the ignition is

on and the brake pedal is applied.

To engage P or R, press the release

button on the selector lever.

When position N is selected,

depress brake pedal or apply the

parking brake before starting.

Automatic transmission,

Manual mode:

Move selector lever from D to the

left then forwards or backwards.

+ = Shift to a higher gear

- = Shift to a lower gear

If a higher gear is selected when

vehicle speed is too low, or a lower

gear when vehicle speed is too

high, the shift is not executed. This

can cause a message in the Driver

Information Centre.

Starting the engine:

 Turn key to position 1

 Move steering wheel slightly to

release steering wheel lock

 Manual transmission in neutral

with clutch depressed

 Automatic transmission in P or N

with brake pedal depressed

 Do not accelerate

 Diesel engines: turn key to

position 2 for preheating and

wait for ! to extinguish

 Turn key to position 3 and

release

The key does not have to be held in

position 3 - the Automatic Starter

Control ensures that the system will

go on starting automatically until

the engine is running. Because of

the checking procedure, the engine

starts running after a short delay.

Stop-start system:

When conditions allow, the system

switches off the engine to save fuel

and reduce emission levels if the

vehicle is at a low speed or at a

standstill, e.g. at traffic lights or in a

traffic jam. It starts the engine as

soon as the clutch is depressed.

To activate an Autostop:

 Depress clutch pedal

 Shift selector lever to neutral

 Release the clutch pedal

The needle points to AUTO STOP in

the tachometer. To restart engine,

depress clutch again.

Deactivate Stop-Start system

manually by pressing the

eco

button on the instrument panel.

The LED in the button extinguishes

to confirm deactivation.

Manual parking brake:

Always apply firmly without

operating release button and

apply as firmly as possible on uphill

or downhill slopes.

To release, pull lever up slightly,

press release button and lower

lever fully.

To reduce the operating forces,

depress the brake pedal at the

same time.

Closing the boot lid:

Use the interior handle on the

underside of the boot lid to close.

Do not touch the brand emblem

whilst closing as this could unlock

the boot lid again.

Blockage of boot lid

The boot lid can only be opened

when the soft top is completely

opened or closed. The soft top lid

must be closed.

Electrical parking brake:

Pull switch J for approx. one

second, parking brake operates

automatically with adequate force.

For maximum force, e.g. when

parking with trailer attached or on

inclines, pull switch J twice.

The parking brake can always be

activated, even if the ignition is off.

Before leaving the vehicle, check

parking brake status.

To release, switch on ignition, keep

brake pedal depressed and push

switch J.

Drive away function

Depressing clutch pedal (manual

transmission) or engaging drive

gear (automatic transmission) and

then depressing the accelerator

pedal releases electrical parking

brake.

Unlocking and opening the boot

lid:

Press button c on remote control to

unlock boot lid (together with doors

and fuel filler flap).

Then push the brand emblem at

the bottom half to open the boot

lid.

- or -

Press button x on remote control

to open boot lid while the vehicle

remains locked.

Opening the bonnet:

Pull release lever located below

instrument panel on driver’s side

and return it to its original position.

Push safety catch to the right and

open the bonnet.

Secure the bonnet support.

If the bonnet is opened during an

Autostop, the engine will be

restarted automatically for safety

reasons.

Closing the bonnet:

Before closing, press the bonnet

support into its holder.

Lower the bonnet and allow it to

drop into the catch from a low

height (approx. 20-25 cm).

Check that the bonnet is engaged.

Refuelling:

Before refuelling, switch off engine

and any external heaters with

combustion chambers.

Switch off any mobile phones.

Fuel filler flap is located at right

rear side of vehicle.

The fuel filler flap can only be

opened if the vehicle is unlocked.

Release the fuel filler flap by

pushing the flap.

To open, turn the fuel filler cap

slowly to the left.

Vehicle security

Tyre pressure:

Check tyre pressures, including the spare, every 14 days and prior to any long journey; tyres should be

checked when cold. This also applies to vehicles with tyre pressure monitoring system.

The tyre pressure data refers to cold tyres. It applies to summer and winter tyres.

Always inflate the spare tyre to the value specified for full load.

The ECO tyre pressure serves to achieve the smallest amount of fuel consumption possible.

Incorrect tyre pressures will impair safety, vehicle handling, comfort and fuel economy and increase tyre wear.

Warning:

If the pressure is too low, this can result in considerable tyre warm-up and internal damage, leading to tread

separation and even to tyre blow-out at high speeds.

Tyre pressure (psi)

Comfort setting for upto

3 people

Engine

Tyres Front Rear

A14NEL, 225/55 R17 34 34

A14NET, 235/55 R17 34 34

A16XHT 235/50 R18 34 34

245/45 R18 34 34

235/45 R19 34 34

245/40 R20 34 34

A20DTH, 225/55 R17 36 34

A20DTR 235/55 R17 36 34

235/50 R18 36 34

245/45 R18 36 34

235/45 R19 36 34

245/40 R20 36 34

All Temporary spare 61 61

Tyre pressure (psi)

ECO setting for upto

3 people

Engine

Tyres Front Rear

A14NEL, 225/55 R17 41 41

A14NET, 235/55 R17 41 41

A16XHT 235/50 R18 41 41

245/45 R18 41 41

235/45 R19 41 41

245/40 R20 41 41

A20DTH, 225/55 R17 41 41

A20DTR 235/55 R17 41 41

235/50 R18 41 41

245/45 R18 41 41

235/45 R19 41 41

245/40 R20 41 41

All Temporary spare -

Do not use ECO tyre pressure for this

tyre.

Tyre pressure (psi)

With full load

Engine

Tyres Front Rear

A14NEL, 225/55 R17 35 41

A14NET, 235/55 R17 35 41

A16XHT 235/50 R18 35 41

245/45 R18 35 41

235/45 R19 35 41

245/40 R20 35 41

A20 DTH, 225/55 R17 38 44

A20DTR 235/55 R17 38 44

235/50 R18 38 44

245/45 R18 38 44

235/45 R19 38 44

245/40 R20 38 44

All Temporary spare 61 61

Engine oil:

Check engine oil level manually on a regular basis to prevent damage to engine.

Ensure that the correct specification of oil is used.

Check with vehicle on a level surface. Engine must be at operating temperature and switched off for at least

5 minutes. Pull out dipstick, wipe clean, insert to stop on the handle, pull out and read engine oil level.

Insert dipstick to stop on handle and make half a turn.

Important:

It is the owner’s responsibility to maintain the correct level of an appropriate quality oil in the engine.

Do not allow the engine oil level to drop below the minimum level!

Refuelling (continued):

The fuel filler cap can be retained in the bracket on the fuel filler flap.

To refuel, fully insert the pump nozzle and switch it on. After the automatic cut-off, the tank can be topped

up with maximum two doses of fuel. Wipe off any overflowing fuel immediately.

To close, turn the fuel filler cap to the right until it clicks. Close the flap and ensure it engages.

Petrol engines - use unleaded fuel meeting specifications of EN 228 or E DIN 51626-1 or equivalent.

Diesel engines - use diesel fuel meeting specifications of EN 590.

Fuel tank capacity - 56 litres.

Vauxhall Cascada 2013 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vauxhall Cascada 2013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info