Bedienungsanleitung Vauxhall Cascada 2013 (Seite 2 von 2) (Englisch)

529295

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Vehicle features Vehicle featuresVehicle features

Vehicle features

Longitudinal seat adjustment:

Pull handle, slide seat, release

handle.

Danger:

Do not sit nearer than 25 cm from

the steering wheel, to permit safe

airbag deployment.

Seat backrests:

Pull lever towards the rear, adjust

inclination and release lever. Allow

the backrest to engage audibly.

Do not angle the backrest too far

back. We recommend a maximum

rake of approx. 25

Seat height:

Lever pumping motion.

up = seat higher

down = seat lower

Head restraint adjustment:

Press the release button, adjust

height and engage.

Pull the head restraint forwards

slowly to adjust to one of several

horizontal positions and engage.

The upper edge of the head

restraint should be at upper head

level.

Seat belt:

Withdraw seat belt from retractor,

guide it untwisted across the body

and insert latch plate in belt buckle.

To release belt, press red button on

belt buckle.

Automatic anti-dazzle interior

mirror:

Dazzle from following vehicles at

night is automatically reduced if

the vehicle is equipped with an

automatic anti-dazzle interior

mirror.

The lever will not be present on the

underside of the mirror housing.

Exterior mirrors:

Select the relevant exterior mirror

by turning the control to left (L) or

right (R).

Swivel the control to adjust the

mirror.

In position 0 no mirror is selected.

Folding in exterior mirrors:

Manually:

Apply slight pressure to outer edge

of mirror housing.

Electrically:

Turn control to 0 and push control

down to fold exterior mirrors.

Push control down again to return

them to their original position.

If an electrically folded mirror is

manually extended, pushing the

control down will only electrically

extend the other mirror.

Operating windows and soft top

with remote control (continued):

Press button e once briefly: the

doors are locked.

Hold button e pressed once more:

the soft top and the windows will be

closed. Hold button e pressed until

soft top is completely closed.

Release button e during closing of

the soft top: movement stops for

10 seconds; press button e again

to continue closing the soft top.

If the soft top is already closed with

the windows open, press button e

for two seconds after locking to

close the windows.

Lighting:

Turn light switch:

AUTO= Automatic light control:

Headlights are switched

on and off automatically

m = Activation or deactivation

of automatic light control

(switch returns to AUTO)

O =Off

8 = Sidelights

9 =Headlights

Press light switch:

> = Front fog lights

r = Rear fog light

Turn thumb wheel:

q = Headlight range

adjustment

A = Instrument panel

illumination

Turn and lane-change signals:

Lever up = Right turn signal

Lever down = Left turn signal

If the lever is moved past the

resistance point, the turn signal is

switched on constantly. When the

steering wheel is moved back the

turn signal is automatically

deactivated.

For three flashes, e.g. when

changing lanes, press the lever until

resistance is felt and then release.

Move lever to resistance point and

hold for longer indication.

Automatic light control:

When the function is switched on,

with the engine running the system

switches between daytime running

lights and headlights, depending

on external lighting conditions and

information from the rain sensor.

Daytime running lights:

Increases visibility of the vehicle

during daylight.

Automatic headlight activation:

During poor lighting conditions the

headlights are switched on.

Headlights are also switched on

when windscreen wiper has been

activated for several wipes.

Tunnel detection:

When a tunnel is entered, the

headlights switch on automatically.

Front fog lights:

Operated with the

> button.

Light switch in position AUTO:

Switching on front fog lights will

switch headlights on automatically.

Rear fog light:

Operated with the

r button.

Light switch in position AUTO:

Switching on rear fog light will

switch headlights on automatically.

Light switch in position

Rear fog light can only be switched

on with front fog lights.

Headlight range adjustment:

To adapt headlight range to the

vehicle load to prevent dazzling of

other road users, turn thumb

wheel

? to required position.

0 = Front seats occupied

1 = All seats occupied

2 = All seats occupied and

load compartment laden

3 = Driver’s seat occupied and

load compartment laden

Windscreen and headlight

washer:

Pull lever. Washer fluid is sprayed

onto the windscreen and the wiper

wipes a few times.

If the headlights are on, washer

fluid is also sprayed onto the

headlights, provided that the lever

is pulled for a sufficiently long

period.

The headlight washer system is

then inoperable for 5 wash cycles

or until engine or headlights have

been switched off and on again.

Headlight flash, high beam and

low beam

Headlight flash = Pull lever

High beam = Push lever

Low beam = Pull or push lever

High beam assist

This feature allows high beam to

function as the main driving light at

night and when vehicle speed is

faster than 25 mph.

To activate, push the lever

forwards twice at a speed above

25 mph.

The green control indicator l

illuminates continuously when high

beam assist is activated, the blue

one 7 illuminates when high beam

is on.

Hazard warning flashers:

Operated with the

¨ button.

In the event of an accident where

the airbags are deployed, the

hazard warning flashers are

activated automatically.

Heated rear window, heated

exterior mirrors:

The heating is operated by

pressing the

Ü button. The LED in

the button indicates activation.

Heating functions with the engine

running and switches off

automatically after a short time.

Heated rear window is deactivated

when the soft top is opened.

Demisting and defrosting the

windows:

Press button

Fan automatically switches to

higher speed and air is directed

towards the windscreen.

Set the temperature control to the

highest level.

Switch cooling

n on.

Switch heated rear window

Ü on.

Open side air vents and direct them

towards the door windows.

Seat position:

Sit with buttocks as far back

against backrest as possible.

Adjust distance between seat and

pedals so that legs are slightly

angled when depressing pedals.

Slide the front passenger seat as

far back as possible.

Steering wheel adjustment:

Unlock the lever, adjust the

steering wheel, then engage the

lever and ensure it is fully locked.

Adjust only when vehicle is

stationary and steering wheel lock

is released.

Seat inclination:

Lever pumping motion.

up = front end higher

down = front end lower

Interior mirror:

Swivel mirror housing to adjust.

To reduce dazzle, adjust the lever

on the underside of the mirror

housing.

4-window switch:

Central switch in the centre console

is used to operate all windows.

Push switch , briefly to open all

windows automatically.

Pull switch , briefly to close all

windows automatically.

Safety function:

If the window glass encounters

resistance above the middle of the

window during automatic closing,

it is immediately stopped and

opened again.

Operating windows and soft top

with remote control:

The windows and the soft top can

be operated remotely from outside

the vehicle.

Press button c once briefly: the

doors are unlocked.

Press button c again for

two seconds: the windows open

automatically.

Hold button c pressed after

unlocking: the soft top will be

opened. Hold button c pressed

until soft top is completely opened.

Release button c during opening of

the soft top: movement stops for

10 seconds; press button c again

to continue opening the soft top.

Power windows:

Switch on ignition to operate.

Front switches operate the front

windows and rear switches operate

the rear windows.

 Push switch = Open window

 Pull switch = Close window

Push or pull switch gently to the first

detent position: Window moves up

or down as long as the switch is

operated.

Push or pull switch to the second

detent position and then release:

Window opens or closes

automatically. Operate the switch

again to stop window movement.

If the window glass encounters

resistance above the middle of the

window during automatic closing,

it is immediately stopped and

opened again.

Windscreen wiper:

2 =Fast

1 =Slow

P = Timed interval wiping

or automatic wiping with

rain sensor

§ =Off

For a single wipe when the

windscreen wiper is off, press the

lever down.

Vehicles with adjustable wiper

interval: With wiper lever in

position P,

turn adjuster wheel

upwards or downwards to make

wiping interval shorter or longer.

Do not use if the windscreen is

frozen.

Switch off in car washes.

Vauxhall Cascada 2013 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vauxhall Cascada 2013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info