Bedienungsanleitung Vauxhall Combo 2011 (Seite 2 von 2) (Englisch)

529298

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Vehicle features Vehicle features Vehicle features

Longitudinal seat adjustment:

Pull handle, slide seat, release

handle.

Danger:

Do not sit nearer than 10 inches

(25 cm) from the steering wheel, to

permit safe airbag deployment.

Seat backrests:

Rotate knob on side of seat, move

seatback to a suitable position and

release lever to lock.

Do not lean on the seatback whilst

adjusting it.

Head restraint adjustment:

Press the release button, adjust

height and engage.

The upper edge of the head

restraint should be level with the

top of the head.

Seat belt:

Withdraw seat belt from retractor,

guide it untwisted across the body

and insert latch plate in belt buckle.

To release belt, press red button on

belt buckle.

Seat belt height adjustment:

1. Pull belt out slightly.

2. Press lock knob.

3. Adjust height and engage.

Seat position:

Sit with buttocks as far back

against backrest as possible.

Adjust distance between seat and

pedals so that legs are slightly

angled when depressing pedals.

Sit with your shoulders as far back

against the backrest as possible.

Set the backrest rake so that you

can easily reach the steering wheel

with your arms slightly bent.

Steering wheel adjustment:

Unlock the lever, adjust the

steering wheel, then engage the

lever and ensure it is fully locked.

Adjust only when vehicle is

stationary and steering wheel lock

is released.

Hazard warning flashers:

Operated with the ¨

button.

On= Press ¨

Off= Press ¨ again

Interior mirror:

To reduce dazzle, adjust the lever

on the underside of the mirror

housing.

Manual exterior mirrors:

Adjust mirrors by swivelling lever in

required direction.

The lower mirrors are not

adjustable.

Electrical exterior mirrors:

Select the relevant exterior mirror

by turning the selector switch to left

or right. In the central position no

mirror is selected.

The mirror glass swivels in the same

direction as the activation of the

selector switch.

Return the selector switch to the

central position to prohibit further

adjustment.

Manual transmission:

Reverse gear: With vehicle

stationary, wait 3 seconds after

depressing clutch pedal, then pull

up the button on the selector lever

and engage the gear.

Manual transmission automated

(MTA):

R =reverse

N =neutral

* =neutral

A/M=automatic or manual mode

E =eco mode

Move the selector lever to the

appropriate position and release.

Selector lever returns to centre

position.

Press the E button on the selector

lever housing. Control indicator E is

shown in the transmission display

to indicate activation.

Depress the foot brake when

starting the engine.

The current gear/mode is shown in

the transmission display.

Parking brake:

To release parking brake, raise

lever slightly, press release button

and lower lever fully.

Always apply parking brake firmly

without operating the release

button and apply as firmly as

possible on an uphill or downhill

slope.

To reduce the operating forces of

the parking brake, depress the

brake at the same time.

Light switch:

Rotate end of lever:

9 = Sidelights and headlights

$ = Off

Operate buttons on instrument

panel:

> = Front fog lights

r = Rear fog lights

ÁÀ = Headlight range

adjustment

Correct headlight adjustment

reduces dazzle for other road

users. With low beam on, adjust to

suit vehicle load.

Headlight flash, high beam and

low beam:

Headlight flash = Pull lever

towards

steering wheel

High beam = Push lever

forwards

Low beam = Pull lever back

towards

steering wheel.

Control indicator C illuminates in

instrument cluster when high beam

and headlight flash is on.

Turn and lane-change signals:

Lever up = Right turn signal

Lever down = Left turn signal

If the lever is moved past the

resistance point, the turn signal is

switched on constantly. When the

steering wheel is moved back the

turn signal is automatically

deactivated.

For five flashes, e.g. when

changing lanes, press the lever until

resistance is felt and then release.

Windscreen wiper:

Rotate lever:

$ = Wiper off

Ç = Intermittent operation

È = Slow

É = Fast

Move lever up:

Single swipe.

Warning:

In freezing conditions, wiper blades

can freeze to the windscreen.

Release wiper blades from the ice

before operating the windscreen

wiper, to prevent wiper motor

damage.

Windscreen wash:

Pull lever. Wash fluid is sprayed

onto the windscreen and the wiper

wipes for a few strokes.

Rear window wiper/wash:

Rotate lever:

$ = Wiper off

e = Wiper on

Wash fluid is sprayed on to rear

window when the lever is pushed

away from the steering wheel.

The rear window wiper comes on

automatically when the windscreen

wiper is switched on and reverse

gear is engaged.

Seat height:

Lever pumping motion

up = seat higher

down = seat lower

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vauxhall Combo 2011 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vauxhall Combo 2011

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info