Bedienungsanleitung Vauxhall Meriva 2010 (Seite 2 von 2) (Englisch)

529255

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Vehicle features Vehicle features Vehicle features

Longitudinal seat adjustment:

Pull handle, slide seat, release

handle.

Danger:

Do not sit nearer than 10 inches

(25 cm) from the steering wheel, to

permit safe airbag deployment.

Seat backrests:

Pull lever, adjust inclination and

release lever. Allow the seat to

engage audibly.

Do not angle the backrest too far

back. We recommend a maximum

rake of approx. 25

Seat height:

Lever pumping motion

up = front end of seat higher

down = front end of seat lower

Head restraint adjustment:

Press the button, adjust height and

engage.

The upper edge of the head

restraint should be level with the

top of the head.

Seat belt:

Withdraw seat belt from retractor,

guide it untwisted across the body

and insert latch plate in belt buckle.

To release belt, press red button on

belt buckle.

Seat belt height adjustment:

1. Pull belt out slightly.

2. Press button.

3. Adjust height and engage.

Seat position:

Sit with buttocks as far back

against backrest as possible.

Adjust distance between seat and

pedals so that legs are slightly

angled when depressing pedals.

Slide front passenger’s seat as far

back as possible.

Interior mirror:

To reduce dazzle, adjust the lever

on the underside of the mirror

housing.

Automatic anti-dazzle interior

mirror:

Dazzle from following vehicles is

automatically reduced.

Exterior mirrors:

Select the relevant exterior mirror

by turning the control to left (L) or

right (R). Then swivel the control to

adjust the mirror.

In position

7 no mirror is selected.

For pedestrian safety, exterior

mirrors will swing out of their

normal mounting position if struck

with sufficient force.

Steering wheel adjustment:

Unlock the lever, adjust the

steering wheel, then engage the

lever and ensure it is fully locked.

Adjust only when vehicle is

stationary and steering wheel lock

is released.

Lighting:

Turn light switch:

Auto = Automatic light control

X = Activation or deactivation

of automatic light control

7 = Off

8 =Sidelights

9 =Headlights

Press light switch:

> = Front fog lights

r =Rear fog light

Turn knob:

q = Headlight range

adjustment

k = Instrument illumination

Automatic light control:

Headlights are switched on and off

automatically. When switching on

ignition, the function is active.

With function switched on and

engine running, system switches

between daytime running lights

and automatic headlights,

depending on lighting conditions.

Daytime running lights:

Increases visibility of the vehicle

during daylight.

Automatic headlight activation:

During poor light conditions the

headlights are switched on.

Front fog lights:

Operated with the

> button.

Light switch in position Auto:

Switching on front fog lights will

switch headlights on automatically.

Rear fog light:

Operated with the

r button.

Light switch in position Auto:

Switching on rear fog light will

switch headlights on automatically.

Light switch in position

Rear fog light can only be switched

on with front fog lights.

Vehicle rear fog light is deactivated

when towing.

Headlight range adjustment:

To adapt headlight range to suit

the vehicle load and to prevent

dazzling of other road users, turn

thumb wheel

q to required

position.

0=Front seats occupied

1 = All seats occupied

2 = All seats occupied and

load compartment laden

3 = Driver’s seat occupied and

load compartment laden

Headlight flash, high beam and

low beam

Headlight flash = Pull lever

High beam = Push lever

Low beam = Pull or push lever

Turn and lane-change signals:

Lever up = Right turn signal

Lever down = Left turn signal

If the lever is moved past the

resistance point, the turn signal is

switched on constantly. When the

steering wheel is moved back the

turn signal is automatically

deactivated.

For three flashes, e.g. when

changing lanes, press the lever until

resistance is felt and then release.

Move lever to resistance point and

hold for longer indication.

Switch the turn signal off manually

by moving the lever to its original

position.

Hazard warning flashers:

Operated with the

¨ button.

In the event of an accident where

the airbags are deployed the

hazard warning flashers are

activated automatically.

Windscreen wiper:

2 =Fast

1 =Slow

P = Timed interval wiping

or automatic wiping with

rain sensor

§ =Off

For a single wipe when the

windscreen wiper is off, press the

lever down.

Do not use if the windscreen is

frozen.

Switch off in car washes.

Windscreen and headlight

washer:

Pull lever. Washer fluid is sprayed

onto the windscreen and the wiper

wipes a few times.

Heated rear window,

heated exterior mirrors:

The heating is operated by

pressing the

Ü button.

Heating works with the engine

running and is switched off

automatically after a short time.

Depending on engine type, heating

comes on automatically during

driving when the diesel particle

filter is being cleaned.

Demisting and defrosting the

windows:

Press button

Fan automatically switches to

higher speed and air is directed

towards the windscreen.

Set the temperature control to the

highest level.

Switch cooling

n on.

Switch heated rear window

Ü on.

Open side air vents and direct them

towards the door windows.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vauxhall Meriva 2010 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vauxhall Meriva 2010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info