Bedienungsanleitung VAX Force 3 - VZL-118 (Seite 4 von 12) (Englisch)

540945

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

vax.co.uk

assembly / operation

3. How to Assemble

IMPORTANT: Always unplug the vacuum cleaner

from the electrical outlet before assembling or

removing the accessories.

1. Insert the flexible hose into the inlet on the main body

of the vacuum cleaner. Push in until it clicks into

position (Fig.3/1).

2. Push the telescopic extension tube on to the end of

the handle (Fig.3/2).

3. The telescopic extension tube can be lengthened or

shortened by pushing the button in and sliding the

tube apart or together as required (Fig.3/3).

4. Fit the combination floor head

(Model: VZL-118P & PS

only)

or TurboBrush (Model: VZL-118AT, PS & C only) or

Hard Floor tool head (Model: VZL-118AT & C only) by

pushing onto the extension tube (Fig.3/4).

4. How to Operate

Cord Release

Fully unwind the power cord. A yellow mark on the power

cord indicates the recommended cord length. Do not

exceed the cord length beyond the red mark.

On/Off Button

Insert the power plug into the electrical outlet. Ensure the

vacuum cleaner is switched off.

Press the on/off button located on the top of the vacuum

cleaner and press the button again to turn the vacuum

cleaner off.

Carpet Cleaning

Model VZL-118P & PS only: For carpet and rug cleaning

press the rocker switch on the combination floor head to

raise the brushes.

Model VZL-118AT

, PS & C only: Attach the TurboBrush

floor head to the end of the extension tube. (NOTE:

TurboBrush: for pet hair, stair and large carpeted areas.

NOT recommended for hard floors.)

Hard floor cleaning

Model VZL-118P & PS only: For hard floor cleaning, press

the rocker switch on the combination floor head to lower

the brushes.

Model VZL-118AT & C only: Attach the hard floor tool

head to the end of the extension tube. (NOTE: For parquet

and laminate coverings).

TurboTool

(Model: VZL-118P & PS only):

IMPORTANT: The TurboTool connector must be

added to the handle before the TurboTool may

be attached.

for vacuuming up pet hair, stair and upholstery cleaning.

(NOTE: Do not use the TurboTool on suede and leather

surfaces).

Stretch hose (Model: VZL-118AT, PS & C only): For full

height stair cleaning (NOTE: This should not be used as the

main vacuum hose).

NOTE: For stair cleaning, the unit should always be

placed at the bottom of the stairs.

NOTE: The stretch hose is recommend to be used for a

period of 20 minutes max.

Cord Rewind

To rewind the power cord, press the cord rewind button,

located on the top of the vacuum cleaner, and guide the

power cord with one hand. This will prevent the cord from

whipping which could cause damage or injury.

Carry Handle

Use the carry handle located on the top of the machine to

move the vacuum cleaner from room to room.

Fig.3/1

Fig.3/2

Fig.3/3

Fig.3/4

Vax VZL-118 Series User Guide.qxd:04.09 24/4/09 10:06 Page 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

VAX Force 3 - VZL-118 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info