7
V
ax Careline 0870 606 1248
dirt container & filter / clearing blockages
The post motor filter can be rinsed in warm water (max
40ºC). Allow to air dry for at least 24 hours before
replacing.
NOTE: Do not use any detergents or boiling water to
wash the filter. Vax reccommends washing the filter
every 4 weeks).
Replace the post motor filter in the case and re-fit to the
back of the vacuum cleaner.
7. Clearing Blockages
WARNING: To reduce the risk of electric shock,
the power cord must be disconnected before
performing maintenance or troubleshooting checks.
Turn the vacuum cleaner off and unplug from the electrical
outlet.
The flexible hose and stretch hose can be disconnected
from the vacuum cleaner by pushing in the button on the
hose and pulling away from the machine. Remove any
blockages found then re-connect the hose securely.
Removing debris from the TurboTool
(Model V-112P,
V
112A only)
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Rotate the locking ring 180º (Fig.7/1).
Lift the top cover off and remove any blockage (Fig.7/2).
To re-assemble, ensure that the tabs are engage. Pivot the
lower housing closed and rotate the locking ring 180º
(Fig.7/2).
