IF YOU HAVE WASHING DIFFICULTIES, CHECK..
1 The power washing button is switched on
2 The weight on the end of the transparent tube is
at the bottom of the clean water bucket and not
trapped between motor unit and clean water bucket
3 The transparent tube valve is properly connected
4 The dirty water bucket may be full, causing the
automatic cut off valve to stop the suction
5 There are no kinks in the transparent tube
Remove kinks by rubbing the tube between finger and thumb.
6 The washing tool is flat on the surface
being washed
7 The variable suction power dial is on the
correct setting
AFTER WASHING - ALWAYS
Clean your VAX thoroughly
Keep your VAX assembled.
Clean the washing tool, extension tubes and hose, by sucking up
some clean warm water.
After sucking up the water, leave your VAX switched on, air
flowing through the hose will help dry it out.
AFTER WASHING - REGULARLY
Clean out the washing tool
Turn it upside down and wash it out under warm running
tap water.
Washing : If you have difficulties
What to do after washing
9
FOR LONG PILE
FOR SHORT PILE
