17
To clean or change the filters
Main filter - This filter should be cleaned frequently and washed occasionally.
fig. 17 The cyclone jug filter is located in the top of the dust container. Remove the filter and tap against the side of a
rubbish bin to remove excess dust. The filter can be washed but must be dried thoroughly before re-using.
Vax recommend this filter is replaced annually.
Motor protection filter
fig. 18 The pre-motor filter is located next to the dust container and protects the motor from dust. To access this filter,
open the lid, remove the filter and clean by brushing lightly with the dusting brush.
Exhaust filter
fig. 19 The exhaust filter is housed in the rear of the cleaner. Remove the exhaust filter cover by pressing the tab on
the top of the filter cover down, then pull the cover towards you.
fig. 20 Remove the dirty filter assembly from the cleaner and dispose of the filter.
Note: this filter cannot be washed.
Vax recommend this filter is replaced every 6-12 months, depending on usage.
Attention: Do not use the vacuum cleaner without all of its filters in place.
18 19 20
