Bedienungsanleitung VAX VPW4 PowerWash (Seite 5 von 11) (Englisch)

541538

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Never use the turbo nozzle on cars,

tyres and engines.

WARNING

To attach the jet nozzle,

tthelancewitharm

push and twist to lock

into place.

The jet nozzle has a wider spray and is ideal for use on surfaces areas such as cars, garden furniture,

decking and boats.

To attach the turbo

nozzle,tthelancewith

armpushandtwistto

lock into place.

Using your accessories

The turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios or masonry.

Asitisnotttedwithapressureregulatoritisnotsuitableforuseondelicateorpaintedsurfaces.

Using your machine

Hold down the release button on the

lance, push the jet nozzle and lance

rmlytogetheruntilyouhearan

audible CLICK. Release the button and

gently pull the jet nozzle to make sure it

is locked secure before use.

Hold down the release button on the

lance, push the turbo nozzle and lance

rmlytogetheruntilyouhearanaudible

CLICK. Release the button and gently pull

the turbo nozzle to make sure it is locked

securely before use.

Squeeze the trigger on the

trigger handle to release

a high pressured water jet,

and start cleaning.

IMPORTANT: Always make sure the machine is switched o and the safety button on the trigger handle

is LOCKED before connecting/disconnecting the lance, nozzle or accessories.

Make sure water supply

is not connected. Firmly

push the water hose pipe

with suitable connector

onto the water inlet to

lock into position.

Connect water hose pipe to

a suitable water supply and

turn water on.

Before plugging the

machine in, press the

unlock safety button

on the trigger handle

and squeeze the trigger

until water starts to ow

through the nozzle.

IMPORTANT: Always use an RCD adaptor when using this pressure washer.

WARNING: Don’t leave the pressure washer running when not in use, or for more than 5 minutes to prevent overheating.

Before switching the pressure washer on, the trigger handle must be squeezed to release water and any airlocks in the

machine or pressure hose. Always release any pressure build up in the handle prior to disconnecting the hose.

Connect the power cord

to the mains supply via

an RCD adaptor.

Push the ‘I’ switch to turn on.

The machine will run for a

few seconds then stop but no

water will be released.

Squeeze the trigger on the trigger

handle to release a high pressured

water jet, and start cleaning.

Don’t aim the pressure washer

directly at people, animals, plants,

electrical components, wires or the

pressure washer itself.

WARNING

Push ‘O’ switch to turn o.

Using your machine

Squeeze the trigger on the trigger handle to release a high

pressured water jet, and start cleaning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

VAX VPW4 PowerWash Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info