Bedienungsanleitung VDO Dayton CD 2104 (Seite 16 von 16) (Englisch, Holländisch)

22747

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

* Depending on version

TROUBLE SHOOTING

There may be times when you suspect that your

car radio is not functioning as you would expect it

to. Before calling for service, please read the

operating / installation instructions and review the

following checklists. You may find that an apparent

malfunction can easily be rectified.

If you still have to send your set for service, always

send the complete set (with detachable front). Do

not try to open the set to service it yourself.

Audio

Set does not function. No Display.

• Check fuse (set and car) and connections.

Set functions but no sound.

• Adjust the volume of the set.

• Check fader and balance settings.

• Check aerial and its connection.

• If car phone is connected, see 'SETUP',

check option 'TEL'.

Set mutes and display shows 'TEL MUTE'

but the car telephone is not in used.

• See 'SETUP', check option 'TEL'.

The sound from the speakers is reduced

automatically.

•A built-in safety circuit prevents the temperature

in the set from exceeding a certain level.

•Wait for the temperature to decrease before

increasing the volume.

Radio

Cannot tune to desired station.

• Check that the aerial is fully extended and

properly connected.

• Check that the negative terminal (brown lead)

is connected to earth (car chassis).

• Desired station is too weak, try Manual Tuning.

Poor tuner reception.

• In some cars (e.g. VW and Seat) there is an

active aerial on the roof that needs a 12 Volt

supply. Please ask your dealer to check whether

a 12 volt is supplied to the antenna.

Display shows frequency (not station name).

• Set is tuned to non-RDS station.

Radio mutes momentarily while display shows

'SEARCH' and station name / frequency alternately.

• Set is checking a list of Alternative Frequencies

(AF) for the tuned radio station as reception is

weak. In case no AF is transmitted for the tuned

station, switch off AF via the 'SETUP'.

Display shows 'NO TA', and set beeps at intervals.

• The tuned station becomes too weak to enable

the reception of Traffic Announcements. Use

search tuning to find another station.

• If the TA mode is switched on, search tuning

only selects stations which enable the reception

of Traffic Announcements.

CD / MP3*

Display shows 'CD ERR' or 'ERROR' and set

beeps.

• Check that the discs have been inserted in the

correct way and that you have not inserted a

damaged or dirty disc.

Distorted sound during playback.

• Player unable to read disc. CD damaged or dirty.

CD player does not function.

• If the weather is cold, there may be some

condensation on the laser. Use the set in radio

mode for about 5 minutes to allow the moisture

to evaporate.

Display shows 'NO CD'.

• Check that the CD mechanism or CD magazine

has been loaded with disc(s).

External Remote Display

No display.

Check connector D3 is firmly plug on.

Check SETUP option is selected correctly.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

VDO Dayton CD 2104 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von VDO Dayton CD 2104

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info