22695
47
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
C-IQ
Activating/ deactivating the display of the start/ expiration of C-IQ products.
Settings:
Starting soon: Number of days (1 … 10) in advance that you want to be informed of
your activated products.
Expiring soon: Number of days (1 … 10) in advance that you want to be informed of
the expiration of your activated products.
Using “OUT” you deactivate notification of the start/ expiration of C-IQ products.
Notification is only given once per day.
Speed corr.
Setting the correction factor for the average speed which the navigation system uses
as the basis for estimating the time of arrival. You can adapt the average speed if re
-
quired (e.g. if the estimated time of arrival differs greatly from the actual time).
Settings:
50 ... 150: Correcting the average travel speed in percent.
We do not recommend you deviate significantly from the standard value of 100%.
Ferries*
Allowing/ excluding ferries from the route planning.
Settings:
ON: The navigation system uses ferries for route planning.
OFF: The navigation system uses as few ferries as possible for route planning.
Tollroads*
Allowing/ excluding toll roads from the route planning.
Settings:
ON: The navigation system uses toll roads for route planning.
OFF: The navigation system uses as few toll roads as possible for route planning.
Tunnels*
Allowing/ excluding tunnels from the route planning.
Settings:
ON: The navigation system uses tunnels for route planning.
OFF: The navigation system uses as few tunnels as possible for route planning.
TMC events
Activating/ deactivating the display of traffic information on the guidance screen.
Settings:
ON: Road obstructions on the route (TMC traffic information) are displayed on the
guidance screen.
OFF: No traffic information display.
* Availability of these functions depends on the map data used. If route planning is
not possible without the selected exceptions, ferries, tunnels and toll roads are in
-
cluded in route planning.
Setup
47
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für VDO Dayton MS 4400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info