Bedienungsanleitung VDO X2 cyclecomputing (Seite 9 von 39) (Englisch, Polnisch)

473886

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

X2 VDO CYCLECOMPUTING16

GB SLO PL JP

JP PL SLO GB

www.vdocyclecomputing.com X2 17

5.7 The navigator

With the VDO navigator you can complete trips

according to Roadbooks. Roadbooks = tour

descriptions with km information for certain

points of orientation. The VDO navigator is an

independent km counter and can count forwards

or backwards. The km status can be set at any

desired point. You can therefore start in the

middle of a trip or make a km correction if you

have taken a wrong turn.

Setting the navigator:

Using go to NAVIGATOR/

SELECT. Conﬁrm with

NAVIGATOR/SET. Conﬁrm with

You are now in setting mode

(pressing

for 3 seconds gets

you back to function mode).

Select NAVIGATOR/FORWARD or

NAVIGATOR/BACKWARD using

. Conﬁrm with

NAVIGATOR SET DISTANCE/

CONTINUE. The ﬂashing digit is

ready to be set. Using set

the digits. Access next digit with

. Repeat steps until last digit is

ﬂashing. Conﬁrm with

NAVIGATOR/SET OK? Conﬁrm with

NAVIGATOR/SET DONE appears as conﬁrmation

and your VDO computer automatically returns to

the NAVIGATOR/SELECT menu.

Note: The navigator always runs automatically at

the same time, even if you have not set it.

Set navigator back to zero:

Using go to NAVIGATOR/SE-

LECT. Conﬁrm with

NAVIGATOR/SET

Using switch to

NAVIGATOR/RESET.

Conﬁrm with

Security question: NAVIGATOR/RESET? Conﬁrm with

NAVIGATOR/SET DONE appears brieﬂy and your

VDO computer automatically returns to the

NAVIGATOR/SELECT start menu.

Sleep mode switches itself on after 5 minutes if

no speed impulses are processed and no button

is pressed.

Sleep mode is ended when speed impulses are

processed again (when cycling) or a button is

pressed.

5.8 Sleep mode

Your VDO computer is equipped with a sleep

mode function.

In sleep mode, a large part of the display is switched

off to save battery power. Time, service interval

display and the -symbol (if the stopwatch is

running) continue to be displayed.

Using go to DATA RESET/

SELECT. Conﬁrm with

Use to go to the data you

want to reset:

DATA RESET/TOUR DATA

DATA RESET/TOT RIDE TM

DATA RESET/ODO TOTAL

DATA RESET/NAVIGATOR

Conﬁrm your selection with

Query: SELECTED DATA/RESET?

ATTENTION: This step cannot be reversed.

Only conﬁrm with

, if you want to delete the

selected data. The display conﬁrms:

DATA RESET/RESET DONE.

Automatic return to SETTINGS/SELECT.

You use the RESET function to set any of these back

TOUR DATA

ODO TOTAL

TOT RIDE TM

NAVIGATOR

With the respective reset modes, the following

information is deleted:

TOUR DATA: Day‘s tripdistance, ride time,

average speed, max. speed

ODO TOTAL: Total km, km bike 1, km bike 2

TOTAL RIDE TM: Total ride time, ride time bike 1,

ride time bike 2.

NAVIGATOR: all values from the second

distance counter.

Using go to SETTINGS/

SELECT. Conﬁrm with

You are now in setting mode

(pressing

for 3 seconds gets

you back to function mode).

5.9 Reset functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

VDO X2 cyclecomputing Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von VDO X2 cyclecomputing

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info