Bedienungsanleitung Veho VCC-003 (Seite 4 von 47) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

755338

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

6 7

ENGLISH

4. Recording films

Recording in Manual Mode

Switch the Muvi on using the power switch

and keep the VOX switch in the ‘o’ posion.

The LED will turn solid blue. When the Muvi is

low on charge the LED will slowly ash blue.

If no microSD card has been inserted the LED

will quickly ash green.

To start recording press the record on/

o buon once. The LED will change from solid blue to slow ashing green to

indicate that it is recording. Press the record on/o buon a second me to stop

the recording. All lms will be saved to the microSD card.

If the Muvi has not been used for 2 minutes it will switch to standby mode. To

re-acvate the Muvi press the record on/o buon once (LED turns blue). If the

Muvi is not used for 2 minutes and has a low charge it will power o completely.

If you turn your Muvi on and the LED turns from solid blue to solid green this

means that the microSD card is full. You will need to connect your Muvi to your

computer and then either move the lms to your PC or delete them.

Recording in Sound Acvaon Mode

Switch the Muvi on using the power switch

and then move the VOX switch to the ‘on’

posion. When the external sound goes

beyond 65dB the Muvi will start to record.

The Muvi will automacally stop recording

and enter standby mode if the external sound

remains under 65dB for 2 minutes. The Muvi will start recording again if the

external sound goes beyond 65dB. Please note that the Muvi will automacally

start recording when you enter sound acvaon mode for the rst me. Aer 2

minutes of silence (under 65dB) the Muvi will enter standby mode as above.

The record start/stop buon will not work when in this mode. Recording can only

be controlled by the external sound. To return to manual mode, move the VOX

switch to the ‘o’ posion.

Date and me stamp sync (Pro versions only)

To change the date and me stamp to your local sengs, use the following

instrucons. Ensure your Muvi is connected to your computer via the USB port.

Win Download and run soware hps://bit.ly/2G1vpuM In applicaon window

select your Muvi and ll in ‘Device Time’ and ‘Device Date’ boxes with local

me and date. Save changes and close soware.

Mac Download and open soware hps://bit.ly/2ws6HnU The applicaon

should automacally locate your Muvi, click the ‘Sync’ buon and exit

applicaon.

Important Informaon

The Muvi automacally saves a le aer every 15 minutes of recording. If the baery runs out

whilst recording, the Muvi will automacally save the lm before switching o. However, if the

Muvi is turned o whilst it is recording the lm will not be saved.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Veho VCC-003 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info