622293
7
Zoom out
Zoom in
Vorherige Seite
1/50
Nächste Seite
DVM601
22/08/2013 ©2008 Velleman
®
Components nv
7
the red lead connection.
Press the Hz/% button to switch to frequency; press again to see the
duty cycle (%).
Range
Range
Resolution
Range
Resolution
400.0mV*
40.00V
10mV
600V
1V
4.000V
400.0V
100mV
*: no auto-ranging for AC
AC/DC current measurement
Connect the red test lead to the µA/mA [6] input jack (max. 400mA) or
10A [7] input jack and the black test lead to the COM jack [5].
Set the rotary switch [3] in the desired current range (<4mA: µA ,
<400mA: mA , <10A: 10A ) and use the mode button [3] to
choose between AC and DC current.
Open the circuit in which the current is to be measured and connect the
test leads to the circuit IN SERIES.
Read the current value and the polarity of the red lead connection on the
LCD display.
Range
Resolution
Range
Resolution
400.0µA
0.1µA
400.0mA
100µA
4000µA
A
10A
10mA
Resistance, diode test and audible continuity test
Connect the red test lead to the Ω-jack [4] and the black test lead to the
COM jack [5] (the red lead has a positive polarity "+").
Set the rotary switch [3] in the range position. Do not apply input
voltage at this setting!
Use the mode button [13] to choose between Ω, diode or continuity test.
If the resistance being measured is connected to a circuit, turn off the
power and discharge all capacitors before applying the test probes.
Connect the test leads to the resistor to be measured and read the LCD
display.
Note: wait a few seconds for a stable reading when measuring resistors >
1MΩ.
Range
Range
Resolution
Range
Resolution
400.0Ω 0.1Ω 40.00 10Ω 4.000 10
4.000
400.0
100Ω
40.00
1MΩ
For diode tests, connect the red test lead to the anode of the diode to be
tested and the black test lead to the cathode of the diode. The approx.
forward voltage drop of the diode will be displayed (typically 0.400
0.700V). If the connection is reversed, the display will show “OL.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Velleman DVM601 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info