Bedienungsanleitung Velodyne DD-12plus (Seite 3 von 40) (Englisch)

567709

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

INTRODUCTION

One of the advanced features of your Digital Drive

PLUS

subwoofer is the available options for optimizing the bass output, including Self-EQ,

Auto-EQ

PLUS

and Manual-EQ. You can use all the optimization methods, except Manual-EQ, without either of the user interfaces for Digital

Drive

PLUS

optimization. However, if you want to use Manual-EQ optimization you need to use one of the user interfaces. Also, if you want to

view your subwoofer’s frequency response and/or parameter settings, you need to use a user interface.

Refer to the Digital Drive

PLUS

User’s Manual for information about the Self-EQ, Auto-EQ

PLUS

and Manual-EQ optimization methods and the

parameters each optimizes, descriptions of the parameters that can be optimized manually, and a recommended order to adjust parameters

during Manual-EQ optimization.

For your convenience, Velodyne provides the following two user interfaces for performing optimizations:

• Velodyne’s Digital Drive

PLUS

Windows Setup Program: (Velodyne recommended interface) Software that runs on a Windows

computer. This program is sometimes referred to by the shorter name of Windows interface. The software is used to:

- Control and display preset EQ and parametric filter settings

- Initiate Self-EQ,

Auto-EQ

PLUS

and Manual-EQ optimizations

- Display the subwoofer’s frequency response curve

- Display the parametric filter curves

- Save and open Digital Drive

PLUS

files with subwoofer’s settings and for Manual-EQ only, the frequency response

curve that results from these settings

- Save settings to the subwoofer’s memory

• TV Screen Display and Remote Control Commands: This combination is often referred to by the shorter name of

TV Screen interface because settings and command choices are shown on your TV screen. The TV screen interface and

remote control can be used together to:

- Control and display preset EQ and parametric filter settings

- Initiate Self-EQ, Auto-EQ

PLUS

and Manual-EQ optimizations

- Display the subwoofer’s frequency response curve

- Display the parametric filter curves

- Save settings to the subwoofer’s memory

MANUAL ORGANIZATION

You need to only use one interface for optimization or viewing of settings and frequency response curves. We recommend the Windows

interface as it is usually much easier to connect your subwoofer to your computer than to your TV screen. Also, the Windows interface

allows you to see the parametric filter curves and save settings to files on your computer. These features aren’t available with the TV

screen interface. Because you only need to use one interface, skip to the part of this manual that covers the interface you want to use:

• Part One - W

indows User Interface for Optimization (Recommended Interface)

• Part T

wo - TV Screen User Interface for Optimization

The final part of this manual covers how to update the driver, software, bootcode and firmware.

• Part Three - Software & Driver Updates

[ 1 ]

Digital Drive

PLUS

User Interface Manual

INTRODUCTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Velodyne DD-12plus Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Velodyne DD-12plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info