Bedienungsanleitung Velodyne DD-12plus (Seite 17 von 40) (Englisch)

567709

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

5) On the Frequency Response and Parameters screen, select the Self option in the EQ Optimization Option Selection and

Initiation area.

6) Click Start.

7) The subwoofer produces its own sweep tone and its frequency response.

You can watch the subwoofer smooth its frequency response by adjusting the parametric EQ filter levels on the Frequency

Response and Parameters screen. Self-EQ doesn’t change the Setup preset parameters (volume, crossover

, etc.) Self-EQ

uses a 160 Hz crossover.

9) When Self-EQ finishes, the front subwoofer display shows End for 10 seconds, then the subwoofer reboots by turning itself off and

back on. The display shows the preset number and then volume level. During this process the new filter settings are saved into the

subwoofer’s memory.

10) Click Save to File to save the Setup preset’s EQ filter settings to a DDP file on your computer.

The frequency response curve is only saved with Manual-EQ, not Self-EQ or

Auto-EQ

PLUS

RUNNING AUTO-EQ

PLUS

OPTIMIZATION – STEPPING UP IN POWER

The next level up in the Digital Drive

PLUS

EQ optimization methods is Auto-EQ

PLUS

optimization. To perform Auto-EQ

PLUS

optimization:

1) Set up the microphone as in the Self-EQ instructions above.

2) Make sure the subwoofer and your audio system are both on.

3) Place the Digital Drive

PLUS

Sweep Tone CD into your disc player and press play.

4) Once the sweep tone starts to play, adjust the receiver or processor output level to about the level of a normal-loudness conversation.

5) On the Frequency Response and Parameters screen, select the Auto option in the EQ Optimization Option Selection

and Initiation area.

6) Click Start.

The subwoofer not only adjusts the Setup preset EQ filter parameters as you watch, but it also adjusts the volume, crossover, slope,

and phase while these input fields are grayed out during the Auto-EQ

PLUS

optimization process.

8) You can also watch the status of the subwoofer in the process down in the lower right in the subwoofer/EQ status line.

9) When Auto-EQ

PLUS

optimization finishes, the front display shows End for 10 seconds, the subwoofer reboots by turning itself off

and back on. The display shows the preset number and then volume level. During this process the new filter settings are saved

into the subwoofer’s memory. When the subwoofer is rebooting, the Digital Drive

PLUS

Windows Setup Program shows the

subwoofer is Disconnected.

10) While the subwoofer is rebooting, shut of

f the Sweep Tone CD and remove it from the player.

11) When the subwoofer has finished rebooting, either the program and subwoofer reconnect automatically or you can

click DDPLUS > Reconnect in the menu.

12) Click Save to File to save the Setup preset’s EQ filter settings to a DDP file on your computer. You will need it to

perform the following Manual-EQ optimization instruction.

The frequency response curve is only saved with Manual-EQ, not Self-EQ or Auto-EQ

PLUS

RUNNING MANUAL EQ OPTIMIZATION– ADJUST IT TO YOUR LIKING

In some particularly problematic rooms, it may be necessary to employ even further adjustment than the Auto-EQ

PLUS

. Manual EQ gives

enough flexibility to get the subwoofer response very flat:

1) Set up the microphone, subwoofer and Sweep Tone CD as in the Auto-EQ

PLUS

optimization instructions.

2) Set the system playback volume level as in the Auto-EQ

PLUS

optimization instructions.

3) On the Frequency Response and Parameters screen, select the Manual option in the EQ Optimization Option Selection

and Initiation area, then click Start.

4) W

atch the subwoofer/EQ status line until it says Connected, Not Synced and then Syncing.

[ 15 ]

Digital Drive

PLUS

User Interface Manual

WINDOWS INTERFACE FOR OPTIMIZATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Velodyne DD-12plus Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Velodyne DD-12plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info