Bedienungsanleitung Veritas Amelia (Seite 9 von 158) (Deutsch, Englisch, Holländisch, Französisch)

714713

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

Important Safety Instructions

When using an electrical appliance, basic safety instructions

should always be followed. Please read through this user manual

thoroughly before using your sewing computer and keep these

instructions for your reference.

DANGER – To reduce the risk of electrical shock:

1. The sewing computer should never be left unattended when

plugged in.

2. Always unplug this appliance from the electric outlet imme-

diately after using and before cleaning.

WARNING – To prevent burns, fire, electric shock or personal

injury:

1. Electrical appliances are no children’s toys. Children must be

supervised to prevent them from playing with the sewing

computer. Increased caution is called for if the sewing com-

puter is used by children or in the vicinity of children.

2. This sewing computer must only be used as described in this

manual. Accessories must only be used if they comply with

the descriptions in this manual and the manufacturers rec-

ommendations, otherwise the appliance might be damaged.

3. Never use the sewing computer if a cable or connector is

damaged, not working properly or fault-free, after it being

dropped or damaged or after it coming into contact with

water. In every one of those cases, please bring the sewing

computer to the nearest authorized specialty retailer or to

the service centre to have it checked and repaired resp. to

adjust electrical or mechanical parts.

4. Never use the sewing computer while the ventilation open-

ings are blocked. Keep the ventilation openings of the appli-

ance as well as the foot pedal free from fuzz, dust and cloth

waste.

5. Keep your fingers away from all moving parts. Increased cau-

tion is called for in the vicinity of the sewing needle. Moving

parts such as needle, presser foot lifter, etc. are especially

dangerous for hands and fingers. The sewing area is to be

watched constantly while the machine is in use. Adjustments

on the machine, f.e. changing of the needle, threading, insert-

ing the bobbin or changing the foot are only to be made while

the machine is switched off (Main switch set to „O“).

6. Always disconnect the sewing computer from the power

when maintenance is performed according to the manual,

f.e. when the cover is removed, the appliance is oiled resp.

cleaned or if the light bulb is changed. This means pulling the

power plug. Also pull the power plug when the appliance is

moved or out of use.

7. To switch off, set the main switch to „O“ and pull the plug.

Always pull the plug from the socket when leaving the ma-

chine unsupervised to prevent injuries caused by accidental

activation.

8. Do not pull on the cord to disconnect the plug from the sock-

et. Always use the plug itself, not the cord, to disconnect.

9. The power cord must not be left to hang over corners or

edges or be squashed (Risk of electric shock!). Place the cord

in such a way that nobody can trip over it.

10. Always use a correct needle plate cover that has been includ-

ed with this sewing computer. Using the wrong needle plate

cover can cause the needle to break.

11. Do not use any crooked or broken needles.

12. Always use the appliance on a dry, stable and level worktop.

Keep it clear from hot surfaces and open flame.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Veritas Amelia Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info