1. Adjust to the position you want.
2. Ensure that the wheelchair is stable. If
necessary move it to the position you want.
3. Switch off the drive electronics.
4. Deploy the knee protector (or have it deployed
for you).
5. Check that the feet are resting flat on the
footplate.
6. Deploy the chest belt (or have it deployed for
you).
7. Check whether the armrests are in a good
position.
8. Switch on the drive electronics and select the
adjust function for the upright function.
9. Pull the joystick backwards or push it forwards
to carry out the relevant function.
Bear in mind that, when the upright function is in use,
the wheelchair rests on the support wheels beneath
the footplate. The front wheels lift about 10 mm from
the ground. To change direction, the wheelchair is
then moved using the support wheels and the rear
wheels. There is only limited drive functionality.
3.8 Battery status and charging
• Only use the battery charger delivered with the wheelchair. The use of any other charger may
be dangerous (fire hazard).
• The battery charger is only intended to charge the batteries delivered with the wheelchair, not
to charge any other batteries.
• Do not adapt any of the delivered parts, like cables, plugs or battery charger. Never open or
change the battery or the connection points.
• Protect the battery and battery charger against flames, high and low temperatures (see chapter
5), moisture, sunshine, severe shocks (for example dropping). Do NOT use the battery if this
has been the case.
• Charge the battery with the battery charger, indoors, in a well-ventilated area, out of children's
reach.
• First read the user instruction of the applied battery charger before charging the wheelchair’s
battery. For more information, contact your specialist dealer or consult our website
http://www.vermeiren.com/
