Bedienungsanleitung Vermeiren Sportrider (Seite 12 von 60) (Deutsch, Englisch)

658536

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Sportrider

2013-02

Page 10

Other home devices like CD player, notebook, cordless phones, AM/FM radios, electric shavers and

hair dryers, so far as we know, will have no influence provided that they function perfectly and their

cabling be in an excellent condition. Please conform to the operating instructions accompanying such

electric instruments to ensure trouble free operating of your scooter.

1. Do not operate hand-held (transceivers-receivers), such as citizens band (CB) radios, or turn ON

personal communication devices, such as cellular phones, while the powered vehicle is turned ON;

2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to

them;

3. If unintended movement or brake release occurs, turn the powered vehicle OFF as soon as it is

safe;

4. Be aware that adding accessories or components, or modifying the powered vehicle, may make it

more susceptible to EMI (Note: There is no easy way to evaluated their effect on the overall

immunity of the powered vehicle);

The intensity of the interfering EM energy can be measured in volts per meter (V/m). Each powered

vehicle can resist EMI up to a certain intensity. This is called its “immunity level”. The higher the

immunity level, the greater the protection. At this time, current technology is capable of achieving at

least a 20 V/m immunity level, which would provide useful protection from the more common sources

of radiated EMI. This powered vehicle model as shipped, with no further modification, has an

immunity level of 20 V/m without any accessories.

2.2 Carrying the scooter

The weight of the frame and steering unit is 188,5 kg. This is very heavy to carry.

The best way to carry the scooter is to make use of neutral mode of the scooter. Place the scooter in

neutral and roll the scooter to the desired place.

If this is not possible you can carry the scooter by following steps:

1. Switch the scooter off.

2. Remove loose parts (seat and batteries).

3. Store loose parts in a safe place.

4. Carry the scooter with 2 or 3 persons to the desired place. Take the frame on the chassis, and

not by the bumpers or the plastic covers. Only on the fixed parts from the frame.

2.3 Assembly and disassembly of the scooter

WARNING:

Risk of injury - Make sure that all movable parts are assembled properly.

WARNING:

Risk of injury - Be careful not to cut or bruise yourself with the cables.

WARNING:

Risk of injury - Turn the scooter off before disassembly.

CAUTION:

Risk of pinching - Do not place fingers between the components of the

scooter.

For first time use you must assembly the steering unit. Use the separate assembly instructions.

To disassemble, please proceed as follows:

• Switch the scooter off.

• Remove the seat (see “Adjusting the seat” chapter).

• Lift off the rear plastic cover of the batteries.

• Loosen the straps used to fasten the

batteries in place.

• Unplug all battery plugs (not the pole

connectors) and all cable plug- and socket

connections.

• Lift the batteries out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vermeiren Sportrider Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vermeiren Sportrider

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info