3.6.1 Backrest width and support
The backrest of the wheelchair has a suspension system with adjustable Velcro straps, to adjust
the width and flexibility of the backrest.
1. Pull the backrest cushion from the Velcro straps of the
backrest.
2. Loosen the Velcro straps.
3. Pull the respective strap to the desired position. The
tension of the individual belts can be varied and the
desired support of the back can be set.
4. Place the back cushion back over the backrest starting
at the front and ending at the back.
5. Secure the Velcro connections by pressing the cushion
against the backrest with your hand.
6. Make sure that all straps are secured with Velcro.
3.6.2 Backrest height (step adjustment)
1. Remove the back cushion.
2. Push the spring button located on the back of the back frame tube.
3. Move the backrest up/down to the desired height.
4. Make sure that the spring button clicks back in the corresponding hole.
5. Repeat for the other side. Make sure that both sides are set to the same height and that
they are firmly secured.
3.6.3 Push handle height (stepless adjustment)
Fixing lever
1. Turn the push handle lever (40) to loosen it.
2. Move the push handle up/down to the desired height.
3. Secure the handle by tightening the lever(40).
4. Repeat for the second push handle. Make sure that both
handles are set to the same height and that they are firmly
secured.
Fixing knob
1. Turn the push handle knob (30) a few turns anticlockwise.
2. Move the push handle up/down to the desired height.
3. Secure the handle by tightening the knob; turn it clockwise.
4. Repeat for the other side. Make sure that both sides are set to
the same height and that they are firmly secured.
