3 Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren V200 XL has been designed to be adjust with a minimum of replacements
parts. There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1 Tools
To set up the wheelchair the following tools are needed.
• Wrench set n° 7 to n° 22
• Allen keyset n° 3 to n° 8
• Screwdriver n° 4 to n° 5
• Screwdriver Phillips head
3.2 Manner of delivery
The Vermeiren V200 XL shall be delivered with:
• 1 frame with arm supports, rear and front wheels (standard delivery
• seat height: 500 mm, seat angle: 5°)
• 1 footrest
• Tools
• Manual
• Accessories
3.3 Adjusting the seat height and seat angle
The Vermeiren V200 XL is adjustable in 4 seat heights and 5 seat angles (0°-2,5°-5°-7,5°-
10°) by changing the position of the wheels for each height and angle there is a different
setting of the front and rear wheels.
The summary of the different seat heights by a standard seat angle 5° is tabulated below.
Seat height Rear wheels Front wheels
Hole
Position axle plate
࿉
࿉࿉
࿉
Hole
Bushing
࿇
࿇࿇
࿇
relative to
