Bedienungsanleitung Vermont Castings Dauntless FlexBurn (Seite 18 von 28) (Englisch)

815502

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Vermont Castings • Dauntless FlexBurn Owner’s Manual_R17 • 2020 - ___ • 09/23 183-90-586000C

The Chimney Connector

Two Weeks:

• Inspect the chimney connector and chimney. Clean if

necessary.

Two Months:

• Inspectthechimneyandchimneyconnector.Payparticular

attention to the horizontal runs of chimney connector, and

the elbows. Clean the system if necessary.

Annual Spring Cleaning:

• Disassemble the chimney connector and take it outdoors

for inspection and cleaning. Replace weak sections of

connector.

• Inspectthechimneyforsignsofdeterioration.Repairsto

a masonry chimney should be made by a professional

mason. Replace damaged sections of prefabricated

chimney. Your local Vermont Castings dealer or a

chimney sweep can help determine when replacement

is necessary.

• Thoroughly clean the chimney.

G. The Catalytic Element (Optional)

F. Maintenance Schedule

The Stove

After First Week of Burning:

• Check damper ramp adjustment and damper tightness.

When closing the damper, there should be a distinct stop

asthehandlerotatestotheclosedposition.Ifthedamper

handle does not click over into the closed position or if

the damper falls open on its own after manually closing

the damper, the damper ramp needs to be tightened to

ensure damper sealing and positive engagement of the

damper system. Refer to page 16 for instructions on how

to adjust the damper ramp.

Daily:

• Clear any ash build-up from around the air holes and

combustionowpathinthelowerreback.

• Ashes should be removed before they reach the top of

the ash pan. Check accumulation at least once a day.

• Keep the area around the stove clear of any combustible

materials such as wood, furniture or clothing.

Two Months:

• Check door handle to be sure it is working properly.

Gasketing becomes compressed after a period of time.

Adjust handle tightness if necessary.

• Check leg bolts and heat shield screws; tighten if

necessary.

• If installed:Inspectthecombustorforyashaccumulation

and physical damage. Clean the combustor as needed.

Annual Spring Cleaning:

• Check gasketing for wear, and replace if necessary.

• Remove ashes from the ash pan and replace with a

moistureabsorbingmaterial(suchaskittylitter)tokeep

the interior of the stove dry.

• Clean the dust from the inner sides of bottom, rear or pipe

heat shields if your stove is equipped with them. Clean

surfacesarebetterheatreectorsthandirtysurfaces.

• Touch up the black paint.

• Inspectforandremoveashbuild-upbehindthecombustion

package. This should be done in conjunction with annual

cleaningofthechimneyconnector.Inspectthepassage

behindthecombustionpackage(amirrorwillbehelpful)

and vacuum away ash using a exible vacuum hose

inserted in the passage, Figure 3.7.

Figure 3.7 - Inspectandcleanoutashaccumulationbehindthe

combustion system.

Clean out any

ash build up

Remove

Access Cover

CAUTION

BURN UNTREATED WOOD ONLY. OTHER MATERIALS

SUCH AS WOOD PRESERVATIVES, METALS, FOILS,

COAL, PLASTIC, GARBAGE, SULPHUR, OR OIL, MAY

DAMAGE THE CATALYST.

The Dauntless FlexBurn® is designed to burn equally well

withorwithoutacatalyticcombustor(Part#SRV8346-006),

howeverhighere󰀩ciencieswillbeachievedwhenoperating

with the catalyst. The following section only applies if the

catalyticperformancepack(#0003406)hasbeenpurchased

and installed. The Dauntless FlexBurn® is designed and

certiedtofunctionwithorwithoutacatalyst.Intheevent

thecombustorbecomesnon-functioningthecombustorcan

either be replaced or removed completely.

Ifanon-activecatalystisleftinstalledintheunit,itwillburn

sluggishly and produce noticeable smoke at the outlet of

the venting system. The simplest situation in that case is to

removethedeactivatedcatalystandoperatetheunitasnon-

catalytic. The catalyst can then be replaced as time allows

without producing a smoky burn or low heat output.

Under normal operating conditions, the catalytic combustor

shouldremainactiveforvetosevenyears(dependingonthe

amountofwoodburned).However,itisimportanttomonitor

the combustor periodically to ensure that it is functioning

properly, as well as to determine when it needs to be replaced.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vermont Castings Dauntless FlexBurn Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vermont Castings Dauntless FlexBurn

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info