Bedienungsanleitung Vermont Castings Radiance Series (Seite 4 von 56) (Englisch)

815507

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

443-90-30007498Vermont Castings • Radiance RADVT Installation Manual_R32 • 10/23

A. Massachusetts Safety Information

Requirements for the Commonwealth of Massachusetts

All gas tting and installation of this heater shall only be done

by a licensed gas tter or licensed plumber.

For all side wall horizontally vented gas fueled equipment

installed in every dwelling, building or structure used in whole

or in part for residential purposes, including those owned or

operated by the Commonwealth and where the side wall

exhaust vent termination is less than seven (7) feet above

nished grade in the area of the venting, including but not

limited to decks and porches, the following requirements

shall be satised:

InstallationofCarbonMonoxideDetectors

At the time of installation of the side wall horizontal vented

gas fueled equipment, the installing plumber or gas tter shall

observe that a hard wired carbon monoxide detector with an

alarm is installed on each additional level of the dwelling,

building or structure served by the side wall horizontal

vented gas fueled equipment. It shall be the responsibility

of the property owner to secure the services of qualied

licensed professionals for the installation of hard wired carbon

monoxide detectors.

In the event that the side wall horizontally vented gas fueled

equipment is installed in a crawl space or an attic, the hard

wired carbon monoxide detector with alarm and battery

back-up may be installed on the next adjacent oor level.

In the event that the requirements of this subdivision can not

be met at the time of completion of installation, the owner shall

have a period of thirty (30) days to comply with the above

requirements; provided, however, that during said thirty (30)

day period, a battery operated carbon monoxide detector with

an alarm shall be installed.

ApprovedCarbonMonoxideDetectors

Each carbon monoxide detector as required in accordance

with the above provisions shall comply with NFPA 720 and

ANSI/UL 2034 listed and IAS certied.

Signage

Ametalorplasticidenticationplateshallbepermanently

mountedto the exterior of the building ataminimum

heightofeight(8)feetabovegradedirectlyinlinewith

the exhaust vent terminal for the horizontally vented gas

fueled heating appliance or equipment. The sign shall

read,inprintsizenolessthanone-half(1/2)inchinsize,

“GASVENTDIRECTLYBELOW,KEEPCLEAROFALL

OBSTRUCTIONS".

Exemptions

The following equipment is exempt from 248 CMR 5.08(2)

(a)1 through 4:

• The equipment listed in Chapter 10 entitled “Equipment

Not Required To Be Vented" in the most current edition

of NFPA 54 as adopted by the Board; and

• Product Approved side wall horizontally vented gas fueled

equipment installed in a room or structure separate from

the dwelling, building or structure used in whole or in part

for residential purposes.

Manufacturer Requirements

Gas Equipment Venting System Provided

When the manufacturer of Product Approved side wall

horizontally vented gas equipment provides a venting system

design or venting system components with the equipment,

the instructions provided by the manufacturer for installation

of the equipment and the venting system shall include:

• Detailed instructions for the installation of the venting

system design or the venting system components; and

• A complete parts list for the venting system design or

venting system.

Gas Equipment Venting System NOT Provided

When the manufacturer of a Product Approved side wall

horizontally vented gas fueled equipment does not provide

the parts for venting the ue gases, but identies “special

venting systems", the following requirements shall be

satised by the manufacturer:

• The referenced “special venting system" instructions

shall be included with the appliance or equipment

installation instructions; and

• The “special venting systems" shall be Product Approved

by the Board, and the instructions for that system shall

include a parts list and detailed installation instructions.

A copy of all installation instructions for all Product Approved

side wall horizontally vented gas fueled equipment, all venting

instructions, all parts lists for venting instructions, and/or all

venting design instructions shall remain with the appliance

or equipment at the completion of the installation.

Radiance Direct Vent

Certiedto:ANSIZ21.88-2019/CSA2.33-2019Vented

Gas Heaters

!WARNING

This product and the fuels used to operate this product

(liquid propane or natural gas), and the products of

combustion of such fuels, can expose you to chemicals

including benzene, which is known to the State of

California to cause cancer and reproductive harm. For

more information go to: www.P65Warnings.ca.gov.

B. California Safety Information

Inspection

The state or local gas inspector of the side wall horizontally

vented gas fueled equipment shall not approve the installation

unless, upon inspection, the inspector observes carbon

monoxide detectors and signage installed in accordance with

the provisions of 248 CMR 5.08(2)(a)1 through 4.

Vermont Castings Radiance Series Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vermont Castings Radiance Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info