574311
34
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
EVX-530 SEriES OpErating Manual
32
speed dIal
Your Vertex Standard dealer may have pre-pro-
grammed Auto-Dial telephone number memories into
your radio.
To dial a number:
In the
EVX-531/-534
, press, (or press and hold), the
assigned
PF
key, then press the
SIDE-1
/
SIDE-2
but-
tons (or
[
A
]
/
[
B
]
keys) to select the Auto-Dial memory
number you wish to dial. Press the
PTT
switch to
send a pre-defined DTMF tone. The DTMF tones
sent during the dialing sequence will be heard in the
speaker.
In the
EVX-539
, press, (or press and hold), the as-
signed
PF
key, then press the keypad
([
0
]
-
[
9
]
key
)
corresponding to the Auto-Dial memory number you
wish to dial. The
EVX-539
send a pre-dened DTMF
tone, and the DTMF tones sent during the dialing se-
quence will be heard in the speaker.
dtmf code set
(
eVx-539
)
r
Press, (or press and hold), the assigned
PF
key to
start entering the DTMF dialing sequence.
r
Enter the DTMF digit directly from the keypad
([
0
]
-
[
9
]
key
)
.
r
After entering all DTMF digits, press the
PTT
switch to transmit the DTMF code.
call
(
eVx-531
)
Press, (or press and hold), the assigned
PF
key to
send a 2-tone/5-tone sequential tone.
call
(
eVx-534 & eVx-539
)
The Call feature of the
EVX-534/-539
is different by
the operating system and operating mode.
When using the DTMF Paging System
(
eVx-539
)
This feature, if enabled, allows the user to send any
3-digit Page Call code, used to call other similarly-
equipped stations. Press, (or press and hold), the as-
signed
PF
key, followed by the three digits represent-
ing the Page Call code of the station you wish to call.
Three tones will be heard after the last key is pressed
(the new code will now be transmitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
When using the 2-tone/5-tone Signaling System
This feature, if enabled, Press, (or press and hold), the
assigned
PF
key to send a 2-tone/5-tone sequential
tone.
adVanced operatIon
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vertex Standard EVX-539 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info