Bedienungsanleitung Vestel 65VF7018 (Seite 93 von 110) (Englisch, Türkisch)

517574

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

English - 92 -

Conguring Wired Network Settings in

Advanced Mode

After pressing GREEN button, Advanced mode will

be available. While in Advanced Mode, press RED

button to edit settings. When nished, press OK to

save, Press RETURN/BACK to cancel.

Wi-Fi Settings (Optional)

Wi-Fi feature can be used for a wireless network

connection (optional). The feature is used for

infrastructure purposes only, such as connecting to

the web, hbb sites and connecting with DLNA servers

(optional). Select Wireless Device option to switch to

Wireless Settings from Network Settings window.

Press GREEN button to switch to advanced mode

and then press OK button to edit settings.

To enable Wi-Fi feature, proles should be congured

properly. Please plug in the Wi-Fi dongle(sold separately)

to one of the USB ports (IMPORTANT: “Veezy 100” USB

dongle is required to use wireless network feature. To

use your TV with your wireless network, you need a

“Veezy 100” Wireless USB dongle.).

Press YELLOW button to scan wireless network

from network settings menu. Afterwards available

network list will be displayed. Please select your

desired network from the list. If the selected network

is protected with a password, please enter the correct

key by using the virtual keyboard. You can use this

keyboard via navigation buttons (Left/Right/Up/Down)

and OK button on the remote control. Wait until the

IP the address is shown on the screen.

Afterwards, check your antenna settings and make

changes if necessary. An error message stating “No

Signal” may be displayed if antenna settings are not

congured properly.

Conguring Network Settings

Note: Your TV’s Network Settings include Wired and

Wireless Connection options. However, if your TV

does not have USB Wi-Fi dongle(sold separately),

you should use Wired Connection type. If you try to

connect via Wireless Connection when your TV does

not have a USB Wi-Fi dongle, a warning screen will

appear and the TV will not get an IP address. Try

connecting the LAN cable after this and then the TV

will be able to get an IP address.

Conguring Wired Device Settings

• On Network Settings window you can set network

type of the TV set, which connects the TV to

the Internet. If you are connecting the TV via

ETHERNET INPUT, select Network Type as Wired

Device to congure.

Setting Network Type

• Network type can be selected as Wired or Wireless

device, in accordance with the active connection to the

TV set. Select this as Wired if you have connected to

the TV a LAN cable. Select as Wireless if you connect

via the wireless USB dongle(sold separately).

Setting Conguration Status

• This section displays the status of the connection.

Select Connected if you want to activate Wired or

Wireless connection. Select as Not Connected to

quit an active connection.

IP Address

• If an active connection is available, the IP address

will be displayed on this section. If you want to

congure IP address preferences, press GREEN

button and switch to the advanced mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vestel 65VF7018 Seite 93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info