Bedienungsanleitung Vestel GKSC ZKB60X (Seite 61 von 89) (Deutsch, Englisch, Holländisch, Französisch)

732781

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

EN - 15

Knob Position Function

0 Off position

1 Keep warm position

2-3 Heating position at low heat

4-5-6 Cooking, roasting and boiling

position

Important: The knob rotation

direction may differ according to the

product specification.

Defrost Function: The

oven’s warning lights

will switch on and the

fan will start to operate.

To use the defrost

function, place your

frozen food in the oven

on a shelf in the third slot from the bottom.

It is recommended that you place an oven

tray under the defrosting food to catch the

water accumulated due to melting ice. This

function will not cook or bake your food, it

will only help to defrost it.

Static Cooking

Function: The oven’s

thermostat and

warning lights will

switch on, and the

lower and upper

heating elements will

start operating. The

static cooking function emits heat, ensuring

even cooking of food. This is ideal for

making pastries, cakes, baked pasta,

lasagne and pizza. Preheating the oven for

10 minutes is recommended and it is best

to use only one shelf at a time in this

function.

4. USE OF PRODUCT

4.1 Hob Controls

Ceramic Heater

The ceramic heater is controlled by a 6

position knob.

The ceramic heater is operated by turning

the control knob to the required setting.

Near each control knob is a symbol which

indicates the heater that is controlled by

that knob. The on/off light on the control

panel will show if any of the ceramic

heaters are in use.

Dual and Oval Heaters (if available)

Dual and oval heaters have two heating

zones. To activate the outer zone of a dual/

oval heater, turn the knob to position.

Both outer zones will switch on.

To deactivate the outer zone of a dual/oval

heater, turn the knob to the ‘Off’ position.

Both outer zones will switch off.

Residual Heat Indicator (if available)

After using the hob there will be heat

stored in the vitroceramic glass called

residual heat. If the residual heat level is

greater than +60°C, the residual heat

indicator will be active for the cooking zone

which is above this temperature.

If the power supply to the hob is

disconnected while the residual heat

indicator is on, the warning light will flash

when the power is reconnected. The

display will flash until the residual heat has

decreased or until one of the cooking

zones is activated.

4.2 Oven Controls

Oven function control knob

Turn the knob to the corresponding symbol

of the desired cooking function. For the

details of different functions see ´Oven

Functions`.

Oven thermostat knob

After selecting a cooking function, turn this

knob to set the desired temperature. The

oven thermostat light will illuminate

whenever the thermostat is in operation

to heat up the oven or maintain the

temperature.Oven Functions

* The functions of your oven may be

different due to the model of your product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vestel GKSC ZKB60X Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info