Bedienungsanleitung Vetus IV60024 (Seite 17 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

661552

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

090134.01 17

Inverter type IV60012, IV60024, IV100012, IV100024, IV150012, IV150024, IV200012, IV200024, IV300012, IV300024

ENGLISH

5.4 Remote control panel

The remote control panel can be used for the following func-

tions.

Operating the inverter from the remote control panel is done as

follows:

Switching on and off:

- Use the

key to switch on. The ‘ON’ LED shows that the

inverter has been switched on.

- Use the

key to switch off.

Reset after an overload:

- The inverter can be switched on again after an overload with

the

key.

Power Save Mode:

• The Power Save Mode is switched on and off with the

key. The ‘PWRS’ LED shows that the Power Save Mode is

switched on.

Select display:

key: the output voltage (AC) in Volts.

key: the power in Watts supplied by the inverter to the

users.

key: the battery voltage in Volts.

What function has been selected is shown in

the display with a dot.

‘COM’ LED:

This comes on when there is communication with the inverter.

‘ALARM’ LED:

This comes on if there is an alarm or a fault.

6 Faults

Fault finding table

Fault/indicator Possible cause Solution

‘LOAD’ LED bar flashes. Output overloaded. Reduce the loading.

No output voltage and the ‘BATT’ LED bar

is in the bottom red area.

Battery voltage too low. Charge the batteries.

Check the battery wire and the connec-

tions.

No output voltage and the ‘TEMP HI’ LED

is on.

Extremely high ambient temperature. Let the inverter cool down.

Ventilation openings blocked. Clear the ventilation openings.

Inverter is positioned in a poorly venti-

lated space.

Change the position.

Inverter is positioned in the vicinity of a

source of heat.

Change the position.

Fault in the inverter, for example a faulty

fan.

Have the inverter repaired.

No output voltage and the ‘OVERLOAD’

LED is on.

Output overloaded. Reduce the loading.

Output short-circuited. Check and correct the connections to the

output.

Interference in the picture on a television when particular chan-

nels are selected can often be solved by carrying out one of the

following steps:

• Make sure that the earth connection on the back of the

inverter is connected to the earth of the ship

• Donotswitchonanyothermajorcurrentuserswhilewatch-

ing TV

• Makesurethatthereisnointerferenceonthepowersupply

to the TV antenna

• Useagoodqualityantennacable

• PositiontheTVasfarfromtheinverteraspossible

• Keepthewiresbetweenthebatteryandtheinverterasshort

as possible and twist the battery wires about 1 x per 10 cm of

wire length

WARNING!

Life-threatening voltages are present in the inverter! Therefore,

never open the inverter yourself. Attempts to carry out repairs

yourself can incur the risk of an electric shock or fire.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vetus IV60024 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info