Bedienungsanleitung Vicks Gentle Touch V980E (Seite 6 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

460269

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

10 11

FIRST TIME USE

1. Remove protective label from the LCD display and discard.

2. Pull plastic strip from battery compartment and discard.

HOW TO TAKE A TEMPERATURE (See page 4)

1. Press the Power Button.

2. Wait for OK to appear on the LCD display.

3. Place the yellow ring of the product behind the ear lobe.

4. While holding thermometer still in that spot, press steadily and hold the Start Button.

When the unit beeps, release Start Button. (Takes about one second.)

5. Temperature displays.

6. Wait 10 seconds for the count-down to take additional temperatures.

7. Thermometer will shut off automatically after 60 seconds.

TEMPERATURE TAKING HINTS

• External factors may influence accuracy, including when an individual has:

– been recently swimming or bathing.

– been lying on the side where the temperature is taken from. Never take temperature from the

side on which the patient was laying on. Use the opposite side.

– been recently exposed to hot or cold air temperatures. Wait at least 20 minutes after the

patient was moved to a room with normal operating conditions.

• Readings from the right side of the patient’s head may differ from the readings taken on the left

side of the head. Therefore, preferably take all temperatures on the same side of the head.

• Moving the product whilst it is taking the temperature may affect the reading.

MEMORY MODE

Vicks Gentle Touch Behind Ear Thermometer stores the last 8 temperature readings.

After turning power on, the last temperature is always briefly displayed.

• To retrieve the last 8 readings, press the “M” Button when the thermometer

has <OK> shown on the Display. The Display will show the most recent

temperature with the corresponding reading number, (M:1 for the most

recent). Pressing the “M” Button will show additional readings.

• The Memory mode is exited either automatically if the “M” Button is no longer

pushed or by pressing the Power Button.

CARE AND CLEANING

To clean the sensor, please follow steps from page 5.

• Do not use abrasive cleaners.

• Never immerse this thermometer in water or any other liquid.

• Store thermometer in a dry location at room temperature free from dust and contamination and

away from direct sunlight.

LOW BATTERY INDICATOR AND REPLACING BATTERIES

• When the Low Battery symbol appears on the Display, the thermometer

is still capable of taking about 30 readings before the battery will be

exhausted.

The thermometer takes one 3V lithium battery (CR2032).

To change the battery, please follow instructions from page 6.

CHANGING THE TEMPERATURE SCALE

Your thermometer is set at the factory to display Celsius (°C) temperature

measurements. If you wish to switch to Fahrenheit (°F) and/or back from

Fahrenheit to Celsius, please see illustrations on page 7.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vicks Gentle Touch V980E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info