Personal Steam Inhaler
Inhaler Hood
Flow Levers
Arrow
Index Line
On/Off switch
with Indicator Light
Vent Assembly
Assembly Tabs
Index Line
Water Reservoir
Arrow
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USING,
ESPECIALLY THESE BASIC SAFETY PRECAUTIONS:
WARNING: To avoid electric shock hazard:
1. Appliance should always be unplugged and emptied when not in operation or while
being cleaned.
2. Do not use while bathing.
3. Do not immerse in water or other liquid. Do not overfill.
4. Do not use or store appliance where it may fall into tub or sink. Do not reach for any
appliance that has fallen into water. Unplug immediately.
5. This product has a polarized plug as a safety feature. This plug will fit into a polarized
outlet only one way. If the plug does not fit, reverse it; if the plug still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.
6. Do not use with an extension cord.
7. Unplug appliance immediately after use.
WARNING: To avoid the risk of burns, electric shock,
fire or other injury:
1. Keep out of reach of children. Provide constant close supervision when appliance is
used by invalids.
2. Use appliance only as described in this manual and only with attachments supplied or
recommended by Kaz. Never move or lift the steam inhaler while it is in use. It can
spill boiling water if tilted or upset.
3. Never operate appliance with a damaged cord, or if appliance has been dropped or
damaged.
4. Keep cord away from heated surfaces.
5. Always use appliance on a firm, level surface to ensure against tipping, which would
release boiling water.
6. Do not use appliance while sleepy or drowsy.
7. Do not use in area where aerosol products are being used or where oxygen is being
administered.
8. Never use the Steam Inhaler without water. Never add any medication or inhalant
liquids to the water reservoir, such as Vicks
®
VapoSteam or Kaz Inhalant.
Condition of Sale
As a condition of sale, the purchaser assumes responsibility for the proper care and use
of this appliance in accordance with our printed instructions. The purchaser or user must
judge for himself or herself when to use it and length of use.
SAVE THESE INSTRUCTIONS
CAUTION: When using on wood surfaces, please place unit on water-resistant mat
for protection.
9. Move the Flow Levers counterclockwise for minimum steam flow.
Place your face in the hood as pictured on the cover page. Do not
rest your face on the Inhaler Hood because the soft plastic may
bend, allowing steam to escape or causing the Inhaler to tip over
and spill boiling water. Breathe normally through your nose and
mouth, inhaling steam into your nasal and throat passages.
Continue treatment for five to fifteen minutes (see
How to Regulate
Steam Flow and Temperature
below).
Never move or lift the
Inhaler while it is in use.
Steam is produced by boil-
ing water; tilting can cause
water spill and possible
burns.
10.When vapor therapy treatment is completed, move On/Off switch
to the OFF position. The lamp will go out. Disconnect plug from
electrical outlet. Allow the Steam Inhaler to cool before moving or
refilling it (see
Care and Cleaning
section). Do not operate Steam
Inhaler when empty.
How to Regulate Steam Flow and Temperature
The Personal Steam Inhaler features a patented adjustable Vent
Assembly which allows you to use either of the Flow Levers to control
the amount of steam you inhale as well as regulate temperature.
FOR MORE STEAM:
1. Move either Vent Lever clockwise toward the “HI” setting. More
steam will increase the temperature; this setting will thus feel hotter.
FOR LESS STEAM:
1. Move either Vent Lever counterclockwise for lower steam flow and
temperature.
2. If the steam is still uncomfortably warm, lift your face one or two
inches above the Inhaler Hood and continue to inhale.
4. Using tap water, fill the Water Reservoir to just below the cup rim.
Do not overfill. Use with water only. Do not add any medica-
tion or inhalant liquids, such as Vicks
®
VapoSteam or Kaz
Inhalant, to the water reservoir. An unsafe condition may
result if anything is added to the water.
5. Replace the Vent Assembly. Align the Index Line with the raised
Arrow on the Base. Be sure the Tabs align with the slots on the top
of the Base, then turn the Vent Assembly clockwise until it locks
into place.
6. Replace Inhaler Hood.
7. Connect cord to electrical outlet. Do not use with extension cord.
Press the On/Off Switch to the ON position. The Indicator Light
will illuminate.
8. The Steam Inhaler will take approximately 3-5 minutes to begin
making steam. Use caution, the water reservoir and water will
become extremely hot.
1. Fully unravel cord. Failure to do so could cause overheating and
possible fire hazard. Do not use with extension cords. Place
inhaler on a flat, stable surface for use.
2. Remove Inhaler Hood.
3. Turn the Vent Assembly counterclockwise until the Index Line is
aligned with the Arrow on the top of the Base (just above the
Switch). Note how the Tabs align with the slots in the Base. Lift the
Vent Assembly straight up to remove it.
Using Your
Personal Steam Inhaler
Flow Levers
Lock Symbol
Base
