Bedienungsanleitung Vicks V971N (Seite 4 von 6) (Englisch)

650701

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

5. How to Read the Display

Display Display Meaning

Self-check ensures proper

functioning.

Recall of last reading.

Ready to measure.

Measurement complete.

Low battery indication.

Unit will not take accurate

measurements.

Description

Press the ON/OFF button to turn

on the unit. All icons will be

shown for 2 seconds.

The last reading will be shown

on the display automatically for

3 seconds.

The unit beeps once and the

°F icon will keep flashing.

The reading will be shown on

the LCD display. When the °F

starts to flash the unit is ready

for next temperature.

The battery icon will flash when

the unit is on to alert you to

replace the batteries.

(1) Remove protective cap from thermometer.

Pull sensor cover into position over the hole in

the top of dispenser.

(3)

Completely push the tip into the

sensor cover holder hole. Push firmly.

(2) With Protective Cap off, push the thermometer

vertically into the center part of the sensor

cover.

(4) After feeling a slight click, take out the sensor

with cover attached tightly.

NOTE:

• Unit is calibrated to work with sensor covers. Only use of VICKS sensor covers ensures

accuracy and hygienic use.

• In order to avoid spreading germs, please use a new sensor cover for each measurement.

• Check to ensure sensor cover is fitted on firmly before use. If the sensor cover is broken,

discard and apply a new one immediately.

• Failure to use sensor covers each time will result in low, misreadings.

6. How to Apply a New Sensor Cover

3. Product Description

(1) Sensor Cover

(2) Soft Sensor Tip

(3) Readout Display

(4) Start Button

(5) ON/OFF Button

(6) Battery Cover

(7) Senser Cover

Applicator

(8) Protective

Storage Cap

4. How the VICKS

Ear Thermometer Measures Ear Temperature

The VICKS Ear Thermometer measures infrared energy radiated from

the eardrum and the surrounding tissue. This energy is collected

through the sensing lens and converted to a temperature value. The

measured reading obtained directly from the eardrum (Tympanic

Membrane) can ensure the most accurate ear temperature.

Measurements taken from the surrounding tissue of the ear canal

generate lower readings and may result in misdiagnosis of a fever.

To avoid an inaccurate measurement:

• Use VICKS sensor covers. The unit is calibrated to work with sensor covers.

• Straighten the ear canal by gently pulling the middle of the ear back and up. Pull the ear

straightback for newborns to age 1.

• Place the sensor firmly into the ear canal. Press the Start button and keep the sensor in the

ear until the thermometer beeps to indicate completion of the measurement.

The VICKS Ear Thermometer has been clinically tested to meet ASTM standard E-1065

as pertains to infrared thermometers. It is proven to be safe and accurate when used

in accordance with this operating instruction manual.

(2)

(3)

(4)

(5)

(6)

(7)

(8)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vicks V971N Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info