785220
12
Zoom out
Zoom in
Vorherige Seite
1/63
Nächste Seite
10
8. Specifications
Cyrix Li-ion ct
(see Cyrix Li-ion datasheet for more
information)
12/24-120 24/48-120
Continuous current
120A
Connect voltage
From 13,7V to 13,9V and 27,4V to 27,8V
with intelligent trend detection
Disconnect voltage
From 13,2V to 13,4V and 26,4V to 26,8V
with intelligent trend detection
Start Assist
Yes
(The Cyrix remains engaged during 15
seconds after the control input has been
pulled twice to battery minus.)
Cyrix Li-ion load 12/24-120 24/48-120 24/48-120
Please use a Battery Protect instead: much lower power consumption
Cyrix Li-ion Charge 12/24-120 24/48-120
Continuous current
120A
Connect voltage
Engages when voltage on the charger side
exceeds 13,7V to 13,9V and 27,4V to 27,8V
with intelligent trend detection
Engages when voltage on the charger side
exceeds 27,4V to 27,8V and 54,8V to 55,6V with
intelligent trend detection
Disconnect voltage From 13,2V to 13,4V and 26,4V to 26,8V
with intelligent trend detection
From 26,4V to 26,8V and 52,8V to 53,6V
with intelligent trend detection
Charge not active detection The Cyrix disengages every hour and remains open in case of low voltage on the charger side
General 12/24-120 24/48-120
Over voltage disconnect
16V / 32V
Over temperature disconnect
Yes
Current consumption when open
<4mA
Current consumption when closed
<220mA / < 110mA
Operating temperature range
-20 to +50°C
Protection category
IP54
Weight kg (lbs)
0,11 (0.24)
Dimensions h x w x d in mm
(h x w x d in inches)
46 x 46 x 80
(1.8 x 1.8 x 3.2)
VE.Bus BMS
Input voltage range 9 70VDC
Current draw, normal operation 10mA (excluding Load Disconnect current)
Current draw, low cell voltage 2mA
Load Disconnect output
Normally high (output voltage ≈ supply voltage 1V)
Floating when load needs to be disconnected
Source current limit: 2A
Sink current: 0A
Charge Disconnect output
Normally high, (output voltage ≈ supply voltage 1V)
Floating when charger should be disconnected
Source current limit: 10mA
Sink current: 0A
GENERAL
VE.Bus communication port Two RJ45 sockets to connect to all VE.Bus products
Operating temperature -20 to +50°C 0 - 120°F
Humidity Max. 95% (non-condensing)
Protection grade IP20
ENCLOSURE
Material and colour ABS, matt black
Weight kg 0,1
Dimensions (hxwxd) in mm 105 x 78 x 32
STANDARDS
Standards: Safety
Emission
Immunity
Automotive Directive
EN 60950
EN 61000-6-3, EN 55014-1
EN 61000-6-2, EN 61000-6-1, EN 55014-2
EN 50498
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Victron Battery Management System VE.Bus BMS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info